needing new strut brace

[nbristow01]

Well my FAQ store strut brace will not work with the camber plates i have. The studs are too short to be able to go through the 1/4 aluminum on the brace and have enough rom for a nut. So I am looking for one of those strut braces that offset towards the firewall and have the plates that are about 1/8 thick at the strut.

I had bookmarked a few but the computer died and this one does not have the bookmarks. I am searching for one that looks good and does not have to be modified to fit. I had read during my search that several people purchased one from a vendor here that did not fit well and required a bit of additional fitting etc to install

[John_in_VA]

(nt)

[RogueDriver]

I have a stainless steel strut bar I used with camber plates. Email me if your interested.

Jeff

[RayC911]

I still have some bars available. The ends should be thin enough for the nut to catch. Email me if you are interested. thanks

http://www.bmw2002faq.com/component/option,com_forum/Itemid,0/page,viewtopic/p,862135/#862135

[nbristow01]

(nt)

struds are removed from strut bearings. You use the studs welded to the camber plates