VDO 3 and 6 Gauge Panels or other 2 1/16" gauges

[webthread]

I had these cut a while back, these are perfect for installing VDO, autometer, stewart warner etc requiring a 2" to 2 1/16" size opening. they are made of 1/8" thick ABS plastic, the finish is called "haircell" which I would describe as a non-intrusive texture.

Most of them are the width of the Radio DIN opening, just slightly less than 7.5" wide with varying degrees of height.

I also have them in 7" widths.

Please note that all panels are 1/8" thick, some of the panels are shown below are in stacks but all are the same thickness.

You can install them from behind using clamps or using screws through the front if you want to drill your own holes. I am selling them as is, and you can trim them as needed with a simple file or sand paper/hacksaw, etc. If you have special needs, let me know and I can try to help you.

I'd like $13 shipped for the 3-gauge panels and $20 for the 6-gauge panels. I accept PayPal and I don't charge paypal fees so that's the price. If you want to send me a check or offer a partial trade me something, i'm open to that too, but please understand that I'd like to wait for the check to clear first if you go that route. Thanks.

[ibjettin]

i'll take that 3 hole one on the bottom right. Email me your PayPal info.

mrbdooley@gmail.com

[webthread]

All emails replied