2000 tilux motor mount

[rddts]

I am looking for a driver side motor mount for my 67 2000tilux, anyone know who still have them?

I also need a new front shock insert for that car

[kiva667]

There's a d/s motor mount here on German ebay:

http://www.ebay.de/sch/i.html?_nkw=Bmw+1800+2000+gummi&_sacat=0&_dmpt=DE_Autoteile&_odkw=Bmw+Neue+Klasse&_osacat=0&_trksid=p3286.c0.m270.l1313

Says only ships within Germany but you can always ask...

[rddts]

That is a round one, the one my car is rectangle.i don't see modification to make fit.

[Luis]

You have a picture? I have one that I think might work for you. It's slightly bent but it will fit or can be straightened. Email me at arisso AT wi dot rr dot com

[mcmil]

I have an early style mount with mounting lugs like #15

Lightly used (still has the BMW spare part label on it!) It's the last one I have or ever expect to see. $250

I also have a full set of correct Boge shocks, NOS, still in the box, front and rear. $375 for the set complete.

PayPal preferred.

I can be reached at mcmil at prodigy dot net

[kiva667]

Right. Round one is for '69 and up, I think?

[rey949]

Walloth and Nesch has both left and right motor mounts for later NKs.

http://www.wallothnesch.com/e/ange/framespecialoffer.htm

Is this what you need???

Rey

[rey949]

Walloth and Nesch has both left and right motor mounts for later NKs.

http://www.wallothnesch.com/e/ange/framespecialoffer.htm

Is this what you need???

Rey

[rddts]

No, it is a rectangle funny looking motor mount.

[rddts]

can you email me rddts@comcast.net I would like to know more about it.

[David Nixon]

Hi all, 

 

I am revitalising this old thread instead of starting a new one as it is on the same topic.

 

I have an 67 TiLxu and the LH engine mount (early style) is sagging ?. As it replacements are next to impossible to find (yes they pop up from time to time), I am wondering if it is possible to use a late model mount instead? Does anyone know what changed between the two types? What mods are required to make it work etc?

 

I know this isn't preferable but if my mount completely dies I would like to know what my options are.

 

Thanks a heap,

 

[kiva667]

I have a repro early type d/s mount that I acquired from Vintage Autobahn a couple years ago. Was hoping it would make a bit less vibration than the repro poly mount I'd bought from IE some years prior. I never switched however because it seemed

to both me and people I showed it to that the VA mount would not be quieter than the IE version.

The original mounts were all rubber and doomed to fail because of the peculiar design. Mine sure did. But it was quiet...

 

Anyway if you're interested (and if there are no current reproduction  mounts available from suppliers) PM me and I'd be happy to send mine along. Can dig it out of the stash and send pics first.

 

[325ix86]

In't it this one?

Engine support rubber left up to 1968 you need 1 for 1 car

WWW.WALLOTHNESCH.COM

---

Engine support rubber left up to 1968 you need 1 for 1 car

s

[David Nixon]

Thanks a heap all, yes that is the one! I just saw that they had sourced some reproduction ones! So stoked!

[NickVyse]

That's cool - I wonder if they're any better than the originals? It's obviously a weak design as BMW quite quickly changed it, but I was never sure if the 3 mounts I've broken were down to old rubber, hooligan driving or just the weak design. Probably a bit of everything.