Jump to content

Tach and MSD6a Hook up anybody know how

Guest Anonymous

Recommended Posts

Guest Anonymous

Anybody out there hook up a msd 6a to their otherwise

stock 2002 before.My wires are factory and un cut like

most cars I have seen.The car is a 72 2002 not a tii .I

hooked up the msd and it works beautifully.The problem

is that my tach does not work when hooked up and a tach

runs off the neg,side of the coil correct me if I'm

wrong.When I remove the msd wiring and put it to the

original set up the tach works.I set up the msd exactly

how the directions show and it still does not work it

suggest a tach splitter or something.Anybody out there

been thru this and have some suggestions.I tried to

pull wires from the tach to a little output on the

other side of the msd box but it does not work still I

would like a tach to work.My friend suggested to

replace the tach wi

Link to comment
Share on other sites

Guest Anonymous

There's two types and it's the cheaper one that works. I think you'll find the part number if you search old messages.


Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.


  • Upcoming Events

  • Create New...