Jump to content

14th Annual SoCal Vintage BMW Meet 2021! “All couped up”

Registration is still open. Rally from NorCal is scheduled for Friday. Post your event photos.

SoCal Vintage is Here! 

Post your photos!

What other parts do I need for a 5 Speed swap


Recommended Posts

So i just recently acquired a 5 Speed Getrag overdrive tranny from a fellow 02er around the area. It is my understanding that aside form the transmission itself i will also need a few other things.

These are the few things I have so far

- The 5 speed Getrag Tansmission with clutch disk, pressure plate etc.

- 5 speed shift plate from Ireland Eng.

- Shirt shift Kit from Ireland

- Bushings for cross member

so what else do i need besides a cross member for the tranny a longer speedo cable and a suitable drive shaft?

Link to comment
Share on other sites

  • 2 weeks later...
depending on how much money you want to spend, a conversion can be done for half the cost of the above list.

please due elaborate I have so far

- 6 hole guido from IE

-longer speedo and trans link cable

- short shift kit

-215mm clutch kit with proper throw out bearing,

-cross member

-245 getrag 5 speed

- 5 speed shift plate

- trans mounts

might install with help of friend or take to shop as i have no tools for a job like this.... thats pretty much the only thing holding me back and a drive shaft..

Link to comment
Share on other sites

depending on how much money you want to spend, a conversion can be done for half the cost of the above list.

please due elaborate I have so far

- 6 hole guido from IE

-longer speedo and trans link cable

- short shift kit

-215mm clutch kit with proper throw out bearing,

-cross member

-245 getrag 5 speed

- 5 speed shift plate

- trans mounts

might install with help of friend or take to shop as i have no tools for a job like this.... thats pretty much the only thing holding me back and a drive shaft..

i bot a 5spd+driveline+shiftplatform for $800

short shift kit pieces $125

guibo $50'sh

228mm clutch kit $240

323i throwout bearing $60'sh

new clutch slave cylinder $50'sh

new clutch master/slave hydraulic line - fabbed at a local hydraulic shop $35 ($70 bucks for a 18" hydraulic line is highway robbery)

viola

email blunt for part quotes

he can do better on pricing than almost anywhere i've bought parts

Link to comment
Share on other sites

  • 8 years later...

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

 Share

×
×
  • Create New...