Jump to content

14th Annual SoCal Vintage BMW Meet 2021! “All couped up”

Registration is still open. Rally from NorCal is scheduled for Friday. Post your event photos.

SoCal Vintage is Here! 

Post your photos!

Tii Parts

Recommended Posts

  • 2 weeks later...
  • 10 months later...
  • 3 months later...

Our bracket is designed with a cutout for the longer speedometer

cable which will solve your current challenge.

The stock exhaust downpipe hanger set-up works with the O/D

transmission when used with our shift tower support.

Your picture shows one of the exhaust mount holes being used

for the shift tower support arm.

Link to comment
Share on other sites

Here are some pictures of my car. Re-use the original 4-speed exhaust bracket on the 5-speed tranny. I found it is easier to have the back of the transmission slightly lowered to insert the speedo cable then lift and bolt the bracket to the car.


Note the marks on the exhaust pipe from the original support bracket at the 4-speed location.



Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.


  • Create New...