Jump to content

14th Annual SoCal Vintage BMW Meet 2021! “All couped up”

Registration is still open. Rally from NorCal is scheduled for Friday. Post your event photos.

SoCal Vintage is Here! 

Post your photos!

? for megajolt users.re:welding Trgr. wheel to crnk pulley..


Armond
 Share

Recommended Posts

Armond,

Any competent machine shop should have no problem doing this. Heck I've even made a few...

Depending on the tii accessory pulley that you have, you need to be careful that the pulley is welded on in a position that has adequate clearance for the v belt.

Where are you planning on putting the VR sensor? I mounted mine on the alternator side.

Give me a call for more details...

KC

Link to comment
Share on other sites

Armond,

Any competent machine shop should have no problem doing this. Heck I've even made a few...

Depending on the tii accessory pulley that you have, you need to be careful that the pulley is welded on in a position that has adequate clearance for the v belt.

Where are you planning on putting the VR sensor? I mounted mine on the alternator side.

Give me a call for more details...

KC

hey KC..havent clarified this with Tom at 02again if this bracket would would work for a Tii . Apparently bolts to the water pump...could you please e-mail me your number. Thanks

post-1760-13667631050417_thumb.jpg

Link to comment
Share on other sites

  • 4 weeks later...

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

 Share

×
×
  • Create New...