Continuing on...working on the intercooler plumbing
Made this tool to be able to put a bead on the IC piping.
Short one from the turbo to the IC
I'm getting better and better an aluminum....
From IC to Throttle Body
Pulled back a bit
BOV flange welded on
Air filter setup...
This car will have AC so it needed a spot for a drier. Using a e30 drier as it is easy to replace if needed.
Small bracket..cad first
welded in and drier fitted with lower AC line mocked up
Then making other AC lines...
had to weld to the 318 compressor fitting and add a crimp connector.
on the car (mock up compressor)
low side mocked up
Line from drier to evap in car. Fill port comes up from down low.
Low side...this was later changed a bit.
hold downs for everything
All the lines mocked up
Crimped and painted
Inside the car