Following Clay W's advice from his headliner diy article, I am leaving it alone to dry for at least a couple of days.  Unfortunately,  with the humidity here in the Finger Lakes hovering in the low to mid 90's, the glue is going to take a looooong time to dry.  Moved on to the passenger seat however.   I managed to break a bolt in the Recaro as I was climing and crawling through the car and had time to look at it.  One of the bolts that holds the seat back on the frame had broken In half.  I had to drill it out, then once removed, a quick trip to Champion Fasteners in Elmira.  They found the correct size bolt and I was soon home and had the Recaro fixed.  Tomorrow some domestic duties to perform but am hoping I have the time to adjust the valves in the 1600, been meaning to do it for several years.  Hoping that forcing myself to do the valves will give extra time for the glue to dry.