How much pressure am I under!!!???

Dudeland

243 views

Ok so in light of the fact that fuel pressure is very, very important to fuel injection operating correctly.  I decided to get a digital fuel pressure gauge for the car.  With old gas tanks, and aftermarket parts and fuel system, you really don't know how the car is going to react.  Rather than guessing what it is, or if something is going wrong, I can take fuel pressure out of the pool of questions.   I also wanted to see the change in fuel pressure under different driving conditions.    Worst case scenario, I replace my existing oil pressure gauge with this one, as it matches my current AEM afr gauge.  

 

The Sniper EFI allows you to manually correct for actual fuel pressure in the software.  So it can factor in pressure that may be slightly higher or lower than the desired fuel pressure of 59-60 PSI.  The -6 to -6 fitting will also help because the existing -6 coming from my tank will be too short, as I realized only later that the fuel inlets will be facing forward. 

 

If this thing does work then I will likely replace the pump with a returnless in tank unit when I get my gas tank re-done.  At some point in the tank's history, the bottom was dented in, not enough to really worry about, but it still needs to be addressed. 

 

 

So this morning while I was having my coffee I came up with this from Summit. 

 

AER-FBM2183 FITTING Ready to Ship $9.99 1 $9.99  (-6 an to -6 an with a 1/8 NPT hole for fuel pressure sensor)

AVM-30-4401 FLUID PRESSURE GAUGE OIL/WATER Ready to Ship $195.79 1 $195.79 (fuel pressure gauge, although it says oil/water)

SUM-220687 -06 90 HOSE END SWIVEL Ready to Ship $12.59 1 $12.59 (swivel fitting for fuel)

SUM-220688 6AN 120 DEGREE HOSE END Ready to Ship $15.29 1 $15.29 (swivel fitting for fuel)

SUM-220690 6AN HOSE END STRAIGHT Ready to Ship $4.49 1 $4.49 (swivel fitting for fuel)

SUM-220691 6AN 150 DEGREE HOSE END Ready to Ship $15.29 1 $15.29 (swivel fitting for fuel) 

 

Express shipping to Canada hurt a little  ($40 vs 18) and brokerage was higher by about $15, 

 

image.thumb.png.82ddf72228c01c94aa8b13e4be3fc264.png

 

 

 

  • Like 1


3 Comments


Recommended Comments

I'm assuming the Holley unit has its own fuel pressure regulator on there somewhere, but is it vacuum compensated?  Most FPRs (that I'm used to) have a vacuum line going to them so the the pressure drop remains CONSTANT between the fuel pressure in the rail/top side of the injectors and the intake manifold, regardless of the manifold pressure.  I say all this just to warn you to not be surprised if you see changes in the absolute fuel pressure when you open/close the throttle, as that's just the FPR reacting/adjusting to the changes in the manifold pressure.

I suppose it would also be possible to leave the fuel pressure constant in absolute terms, and then just adjust the injector fueling times further to compensate for the MAP deltas, but I don't know of a setup that works this way, so it'd be interesting to know if that's how the Sniper works instead!

Share this comment


Link to comment

Great question, the answer is that it is not vacuum referenced, so that is why they are very particular about the fuel pressure. Even in the software, it allows you to manually tell the computer it has a specific pressure. 

 

 

 

1907467982_ScreenShot2018-10-25at8_25_10PM.thumb.png.643a21ef07e0ed173133e698c7e9ceb6.png

Share this comment


Link to comment

Just to be a little more specific, the base fuel tables created when using the setup wizard work best when running the fuel pressure between 55-65psi.  The Sniper can compensate at least this far to make it work.  Just make sure you check the fuel pressure, and change it in the tune so it more appropriately react.  It is not vacuum referenced, so pressure should remain fairly constant.  -Luke @ Holley Tech

Edited by Holley Tech

Share this comment


Link to comment

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now