Jump to content

69 restomod

  • entries
    5
  • comments
    2
  • views
    1,074

About this blog

taking this 1600 to bare metal to patch and straighten the body and paint while in class for collision repair at my community college.

 

things found that need work:

rusted passenger floor pan, rear passenger floor pan, passenger rocker panel ,trunk driver wheel well to quarter panel ,and spare tire tub

 

holes in passenger rear fender

 

poorly repaired driver and passenger fender, trunk lid, hood 

 

dented passenger door.

 

smashed rear by exhaust.

 

 

 

19D00F65-57AA-4046-B7CB-ABF4D976845C.jpeg

66FB7CCE-7247-4709-A200-8FA1E552431E.jpeg

F8601DFB-70E3-4EED-B66A-D1343CED2CAB.jpeg

23046E93-059D-496C-AF1A-BA47EA31B8DF.jpeg

Entries in this blog

Trunk pan and tail

Well got around to installing the trunk pan and tail, original was hit before I got it, plus rust… so figured it just replace it all. it wasn’t too bad, I got the MVP pan and tail, only minor adjustments were needed. The biggest issue was the tail had been replaced before so when I removed it the gap was signification from rear quarter to tail. I decided to weld it on inside as well as outside and will have a seamless look.

cmiceli

cmiceli in first steps

Rust repair

So much rust in the pan and tail panel i decide to just replace it, found some rust in the wheel wells and where the pan spot welds too. Slow progress but progress

cmiceli

cmiceli in first steps

  • Blog Statistics

    • Total Blogs
      448
    • Total Entries
      2,348
×
×
  • Create New...