First off I bought my first 2002 in June of this year. The head gasket blew and so I had to replace the gasket. The FAQ helped me out a lot since this is my first mechanical project where Im going to do as much work as I can. I had the head machined and the valves done when I replaced the gasket. I have been driving it on and off for a about a month.
Start with an artsy shot
After the head gasket I have been doing small things to the car
My Heater Valve was not connected to the control cable. So I took it out to look at it and the inside wouldnt swivel so I temporarily replaced it with this 20$ plastic one.
The door wouldn't close smoothly and line up with the body.
I ordered this cheap part Door stop thing Fixed the problem.
I replaced the recaro straps with some from ardvark I also had some foam from a camping mat that I added.
The indicators weren't working so I pulled out the wiring diagram and tried to follow the wires and found the flasher with one wire unhooked.
There are four slots in the white plastic plug I tried each one til one worked.
Im not sure what the other slot if for.
All the stuff removed from the car.