Jump to content
  • entries
    126
  • comments
    307
  • views
    28,597

About this blog

The restoration and refurbishment of my beloved 1973 2002Tii, Vern, by Vintage Sports and Restoration in Bedford New Hampshire. Work began September 18, 2017

 

 

Vern_at_NMR.jpg

IMG_3117.JPG

Cylinder Head.JPG

IMG_4603.JPG

IMG_4604.JPG

Screen Shot 2017-11-13 at 5.57.38 PM.png

Screen Shot 2017-11-13 at 6.05.58 PM.png

Screen Shot 2017-11-13 at 6.04.54 PM.png

IMG_4977.jpg

IMG_4978.jpg

IMG_4979.jpg

Entries in this blog

Making An Aluminum Under Dash Panel

Made a new hood release/hazard switch under dash panel out of 24 x 24 1/16th inch aluminum sheet I bought at Lowe's, January 30, 2021.   The original hood release hazard switch panel was ripped & distorted from the past 52 years of heat & cold use.   1. Made a painters tape template. The peeled it off the panel slowly & carefully. 2. Flattened the tape to the aluminum sheet along the grain. 3 Outlined the template with Sharpie & marked all the screws
  • Blog Statistics

    • Total Blogs
      448
    • Total Entries
      2,347
×
×
  • Create New...