Jump to content
  • entries
    31
  • comments
    66
  • views
    22,229

About this blog

Hello! Here is the story of one 1972 Bmw 2002, one empty wallet, and one dude grinning ear to ear.

Entries in this blog

Getting my shift together...

Hello again, This past weekend was full of activity. I have the M42 officially bolted in, hopefully for good! The transmission and driveshaft are also bolted in and my shifter is finished as well. Here are some pictures of the process. I didn’t take too many pictures of the shifter build but it was a lot of work! I used the original 2002 shifter housing and shifter but had to shorten the housing about two inches. I then cut the linkages in half and used half the e30 linkage and half the 200

ClassDavid

ClassDavid

Finally got myself a 2002!

Hey everyone!   I am a long time BMW enthusiast and finally got myself a 2002! Well a few months ago, but I Finally decided to start a build! The car is a 72 2002 that had been sitting unrunning for the last 15 years in a garage which kept it in very good original shape. This 2002 has been repainted but almost everything else hasn't been touched. Came with the original wheels, manuals, keys, and is a factory air conditioned car! I have already got the car running and moving but since i

ClassDavid

ClassDavid

Speedometer

So relativitely small update! Got my 71 dash pad in. The 71 dash doesn’t have the “fasten seat belt thing. It isn’t crack free but I think its an improvement. Also bought an MSD tach converter to change the signal so I could use the original Tach, works great! I then bought a speed hut gps speedo. I didn’t make any holes to mount it in and the reason I did that is for a future speedo plan. I heard that you can power an original speedometer with a GPS unit. So I am on the hunt for a pre 74 220km

ClassDavid

ClassDavid

Ice Shenanigans

Had some fun on the ice in the 2002. Got some sweet drone footage as well! Hope you guys enjoy.    

ClassDavid

ClassDavid

M10 Out and M42 Ready to go in!

Hello,  Finally got the M42 all together and it looks awesome. I do think that the engine should look nice in the 2002, not too out of place! Some people sand the raised lines of the valve cover and that looks good in my opinion however I also like the solid black. What are your guys thoughts? Thanks   Got the old M10 out! Now to clean the engine bay and stick the M42 in. Can’t wait!  

ClassDavid

ClassDavid

Recaro

I’m trying to catch up a little now, I registered and insured it recently and have been driving it around as much as possible! I have had Recaro seats out of a mk2 jetta for a while and finally got some brackets to make the install possible. I was worried about the seats looking completely out of place in this car but it works good and man are they ever comfortable! Anyone interested in putting these seats in your car need the power seat versions as they have the six bolt recaro bases where as t

ClassDavid

ClassDavid

10,000 KM

Hello once again!    I haven't posted for a little while but recently passed 10,000km on the 2002 and figured I should update the build! Other than a coolant hose failing (my fault) and the bottom of my Recaro seat collapsing (I hope not my fault.) it has been smooth sailing. Haven't done too much to the car other than enjoy it. Here is some of my adventures...  

ClassDavid

ClassDavid

Full throttle

Got the throttle cable situation sorted. I wanted to use the original M42 cable but it was much to short. I decided after much thinking to use half of the original 2002 linkage as well to solve this shortness. The 2002 originally has a metal rod thats attached to the pedal arm goes up to a pivot point attaches to another metal rod that when twisted turns the throttle on the carb. I cut the end off the rod to the transmission and welded a washer on the end. A grommet goes in the washer and the en

ClassDavid

ClassDavid

Calendars!

Looking for a BMW 2002 calendar? I have a limited run of High Quality 8.5" x 11" Wall Calendars for sale. Perfect Christmas gift to yourself or to the 2002 fanatic in your life.   Only US $30 including Shipping  if you are in Canada, $30CAD including shipping Paypal or E-transfer!         

ClassDavid

ClassDavid

Exhausting Problems...

Hey guys, I got the front suspension together and installed! Bilstein sport shocks and ireland engineering Stage 1 springs. Also installed new wheel bearings and brake rotors. I have yet to install the brakes as I will be rebuilding them but I couldn’t resist lowering the car back on its wheels once again. In my next post this car should be running! I still have to make an exhaust and I need your advice. I am going to be using a performance “stock 2002” exhaust and them just modifying the h

ClassDavid

ClassDavid

Calendars!

Looking for a BMW 2002 calendar? I have a limited run of High Quality 8.5" x 11" Wall Calendars for sale. Perfect Christmas gift to yourself or to the 2002 fanatic in your life.   Only US $30 including Shipping  if you are in Canada, $30CAD including shipping Paypal or E-transfer!         

ClassDavid

ClassDavid

Engine time...

Hello again,   Since my suspension order won’t be shipped for some time I decided to tackle the engine. The new heart is an M42. An inline 4, Dual overhead cam, 16 valve engine from a 1991 BMW 318is. Now although Webbers and a Cam can make the same power from the original engine and it would be super cool, I wanted something dependable and something that I could upgrade in the future to make even more power. The engine was looking a little gross and although I am probably not painting

ClassDavid

ClassDavid

Touring!

Back again to update my project blog. Haven't done a thing to the 2002 except enjoy it. Put just over seventeen thousand km this summer. Don't have too much planned for this winter other than BBS and maybe just a little lower. Now on to the real reason of this update! I am the lucky owner of a 1973 Inka Sunroof Touring! Such a cool car. I can't get over it! The previous owner bought it in 1985 when he was stationed in Germany and drove it a few years before shipping it to Canada. He recently dec

ClassDavid

ClassDavid

Is a project car ever done?

Hello again, I finally rebuilt the brakes! New pads, and rotors as well! Also A little tip for anyone rebuilding stuck brakes. Attach a grease nipple to the brake fluid line and use a grease gun to pump the stuck pistons out. Works great! If you use an air line the pressure will build up until it breaks lose and probably damage something. I actually thought it would be a good idea to paint the brakes before taking them apart so I wouldn’t have to mask anything. Well from rolling the callipe

ClassDavid

ClassDavid

M42 in.... Then back out again....

Update! I got the M42 bolted in! For me at least, this is crazy progress. I made some relatively rough measurements of the m42 in the subframe outside the car. Then proceeded to make engine mounts and bolted it in! I had to change the mounts a little to get the engine to exactly where I wanted, however overall wasn’t too complicated. There definitely is satisfaction to building something yourself. I made sure the M42 was exactly where it needed to be then made transmission mounts, shifter bracke

ClassDavid

ClassDavid

Rear suspension parts!

So recently I knocked a big to-do off the list! Get the rear end together and the car back on all four. Check. I had most of the parts ready so when some much needed parts arrived in the mail, I could have that goal reached in no time. The plan is to go on relatively long drives so its not going to be super low, with that being said I wanted a more aggressive stance than the stock ”4x4” look. I went with Ireland Engineering stage 1 springs. They drop the car about an 1.5”. The final pictures sho

ClassDavid

ClassDavid

Rear suspension update

So I did a little bit of putting stuff together. Here is all the parts a rear brake and control arm assembly consists of. And then all nicely together! Looks way easier in pictures! The wheel bearings were not fun too install… The parts are accumulating… Here the 02 sits patiently waiting for even more parts. I figured I may as well do some polishing and put some trim on the car. Got a new classic style Bmw badge for the front as well. Looks awesome! Way better than

ClassDavid

ClassDavid

Trying to catch up!

Just finished up some rust work in the trunk and rockers so may as well show progress. The strut towers on these cars rust from the inside out so I had to cut out way more than it looked like but the inner tower was super solid so I did not touch it! I fabricated the patch from the roof of a scrap car and am pleased with the results. I also got all the nuts and bolts zinc dichromate plated which I highly recommend to anyone else dealing with rusty bolts! Also notice that hideo

ClassDavid

ClassDavid

Only a few things left to do!

Its been a little while but I’ve been busy! The 2002 is almost done. Not sure if projects are ever “done” but its finally at a point where I can enjoy it, which is kinda nice. Although I might miss fixing stuff here and there, maybe… Anyway first things first. I installed the front bumper. Powder coated the brackets and plated the bolts. Anyone who has fitted a front 2002 bumper knows that it is a pain. Its almost necessary to install the brackets first and make sure you have a magnet on some ti

ClassDavid

ClassDavid

  • Blog Statistics

    • Total Blogs
      448
    • Total Entries
      2,348
×
×
  • Create New...