BMW 2002 FAQ - What are the dimensions of the cylinder head studs?

Home

Date: 10-14-05 01:20 From: steve howe Subject: What are the dimensions of the cylinder head studs?
I was able to cut the nuts with my dremmel and avoid pulling the head. Going to need to replace some studs though and would appreciate knowing the size..thanks

What are the dimensions of the cylinder head studs? - steve howe - 10-14-05 01:20
any good parts store will have them. just metric 10mm studs or go to - Tom Winston - 10-14-05 05:14
REALLY SURE Justin's right - 8mm is correct - Sorry (nt) - Tom Winston - 10-14-05 05:51
another question on this - matt - 10-14-05 06:52
Dealer hs the studs--all are the same length. I bought mine from - mike - 10-14-05 07:23
Using the correct type of loctite is like using the proper knot... - Tom Winston - 10-14-05 07:43
Don't forget the saturn option - torx head stud worked really well - John McA - 10-14-05 08:30
Don't forget the saturn option - torx head stud worked really well - John McA - 10-14-05 08:30
Pretty sure the exhaust studs are 8mm, the head studs - Justin in C'ville - 10-14-05 05:41
READ THE FAQ ON HOW TO INSTALL MANIFOLD STUDS! It's no joke... do it - Tom Winston - 10-14-05 05:47
Very important, please read this - oh2fly - 10-14-05 01:00
Re: Very important, please read this - vintage_car - 10-15-05 06:16
Re: Very important, please read this - oh2fly - 10-15-05 12:04
bringing thread back from the dead... - vintage_car - 11-8-05 09:34
Thanks everyone, job is done and done right! - steve - 10-15-05 03:03