how much for all the seats? drop me an email. tybeesurfer6@yahoo.com
thanks
Austin
_________________

themoose wrote:

how's the dash and tail lights? does it have the interval washer relay and switch or just the normal one? color me interested.

Tail lights look pretty good.

Not sure on the washer relay, if you tell me what to look for I can let you know.

How much you want for the dash and lights? 4 positions on the wiper switch would indicate an interval system.
_________________
'74 2002 (undergoing Megasquirt conversion!)

themoose wrote:

How much you want for the dash and lights? 4 positions on the wiper switch would indicate an interval system.

Alright, pretty sure it is an interval system.

$260 (+ shipping) for dash including knobs, lights, etc. and the complete tail lights.

Did you get this off of craigslist several months ago....needed to be reassembled? I need a pedal box assembly.
Chad
wallinc00@hotmail.com

chad wrote:

Did you get this off of craigslist several months ago....needed to be reassembled? I need a pedal box assembly. Chad wallinc00@hotmail.com

Email sent

EDIT: Email bounced.

cwallin00@hotmail.com

Also interested in all seats (or at least covers). Possibly f&r door panels. Please send me a PM with condition, thanks. Dave V. in NC

Where "near Seattle". I'm north, in Arlington. If you're not too far away, I might stop by and grab some stuff.

Would you chop out the lower front lip and ship it ??

let me know.
_________________
1976 turbocharged 2002, 14psi, T3, 70%LSD, urethane bush, 36x15 intercooler, 63mm tby,SDS EM4F, 5sp overdrive. Bilsts. Tech edge wb02, datalogger, recaros.
1974 2002 auto (under resto)
1992 325i
1991 318is
1985 XR4TI, 22psi
1986 Toyota pick-up

Hows the steering box look? Any adjustment left?

Thanks

-Paul

paulcoakley AT cavtel DOT net
_________________
Paul in Richmond
'70 Chamonix
'95 Lowe 1605 - Evinrude SPL48
'05 Genuine Stella

What condition are the door seals and what's your price.
Email me at bert2fran@yahoo.com

I'm looking for the trunk boards. What condition is the rear seat? I'm located in Seattle, and could stop by.

Thanks
Marshall
206-419-6712

I will take the plastic piece that houses the ignition switch, turn signal and wiper switch and the top piece (foam) that is bolts to. I don't need the lower foam piece where the keys always rub a hole. I would like the hardware as well. Let me know how much please. Thanks, Rick

just reply here or hit the email button...

Noel wrote:

Where "near Seattle". I'm north, in Arlington. If you're not too far away, I might stop by and grab some stuff.

Located in Kirkland. Let me know if you would like to swing by.

Please email me your email address at secretmoose at gmail dot com
_________________
'74 2002 (undergoing Megasquirt conversion!)

PatAllen wrote:

Would you chop out the lower front lip and ship it ?? let me know.

I can chop it off with a sawzall and ship it.

Where would you like it cut?

Das02 wrote:

I'm looking for the trunk boards. What condition is the rear seat? I'm located in Seattle, and could stop by. Thanks Marshall 206-419-6712

Trunk boards.


Rear Seat (if auggiemize doesn't want)

Paul7002 wrote:

Hows the steering box look? Any adjustment left? Thanks -Paul paulcoakley AT cavtel DOT net

I am unsure of what to look for to tell what condition it is in/ adjustment. If you let me know what to look at I will gladly do it, though.

Trackmagics wrote:

PatAllen wrote: Would you chop out the lower front lip and ship it ?? let me know. I can chop it off with a sawzall and ship it. Where would you like it cut?

ohhh

well, i am in Quebec, CANADA, so shipping might be a bit expensive, BUT I WANT IT !!!

Do you plan to remove the fenders soon ?
it gives a better idea as to how/where to cut it.

How much do you want ?
I am expecting to have this part from the lower hole of the bumper braket to down bellow. That means it could include the framing part that rides under the battery (not part of the subframe at all, just plain body panel)
It can even be cut "in half" vertically right in the middle to help shipping.
Let me know !!
_________________
1976 turbocharged 2002, 14psi, T3, 70%LSD, urethane bush, 36x15 intercooler, 63mm tby,SDS EM4F, 5sp overdrive. Bilsts. Tech edge wb02, datalogger, recaros.
1974 2002 auto (under resto)
1992 325i
1991 318is
1985 XR4TI, 22psi
1986 Toyota pick-up

DSCN0375.jpg
Description:
Filesize:	69.3 KB
Viewed:	9 Time(s)

.
I could use a few things from your car.

Shoot me an email: adv_nut (at) yahoo (.) com

Matt

[quote="PatAllen"]

Trackmagics wrote:

PatAllen wrote: Would you chop out the lower front lip and ship it ?? let me know. I can chop it off with a sawzall and ship it. Where would you like it cut? ohhh well, i am in Quebec, CANADA, so shipping might be a bit expensive, BUT I WANT IT !!! Do you plan to remove the fenders soon ? it gives a better idea as to how/where to cut it. How much do you want ? I am expecting to have this part from the lower hole of the bumper braket to down bellow. That means it could include the framing part that rides under the battery (not part of the subframe at all, just plain body panel) It can even be cut "in half" vertically right in the middle to help shipping. Let me know !!

Send me an email and lets discuss further. rbosler (at) gmail (.) come

I would be interested in the drive shaft. How much would it be for the shaft and shipping to zip code 83404.

I need the pieces that hold the sunroof into the rail - the front brackets and the rear pieces that consist of the clips and plastic pieces.

I would like the entire front end if you don't end up cutting off the lip. I will also take the fenders if you keep them all together while removing. Let me know what happens. chetterisbest@yahoo.com, I am located in Kenmore.
_________________
Chet
1975 BMW 2002

chetters7502 wrote:

I would like the entire front end if you don't end up cutting off the lip. I will also take the fenders if you keep them all together while removing. Let me know what happens. chetterisbest@yahoo.com, I am located in Kenmore.

What is wrong with yours ? i could probably use your remains instead of cutting up that nice one ??

could you send me a picture if you are willing to sell me yours instead ?
_________________
1976 turbocharged 2002, 14psi, T3, 70%LSD, urethane bush, 36x15 intercooler, 63mm tby,SDS EM4F, 5sp overdrive. Bilsts. Tech edge wb02, datalogger, recaros.
1974 2002 auto (under resto)
1992 325i
1991 318is
1985 XR4TI, 22psi
1986 Toyota pick-up

i sent you an e-mail trackmagics !! ...
_________________
1976 turbocharged 2002, 14psi, T3, 70%LSD, urethane bush, 36x15 intercooler, 63mm tby,SDS EM4F, 5sp overdrive. Bilsts. Tech edge wb02, datalogger, recaros.
1974 2002 auto (under resto)
1992 325i
1991 318is
1985 XR4TI, 22psi
1986 Toyota pick-up

How much for the door panels? Thomas Kowalke