*** >> I have just updated the parts that I have available below << ***

Hi there, I have abandoned a tii rebuilding project, so I have 90% of a car to sell. The shell will be dealt with separately, so there is no body, minimal glass and virtually no suspension for sale here. Everything listed is off of the car.

I have the following items in the following general condition (e-mail me and I can more accurately describe what you are interested in:

- Tii fuel injection system (K-Fisch pump, warmup regulator, intake manifold, tubes and plenum, throttle body, linkage, injectors, etc. - ALL for $1,000)

- stock tii gas tank. (light rust around the lip, dent the size of a small football and about 2-3" deep, should be able to have it poped out) ($50)

- stock tii boxed rear trailing arms. (Old and crusty. SHould be bead blasted and powder coated. - $150 for both)

- stock tii front brake calipers ($50 for both)

- stock tii front hubs and brake rotors ($500 for the pair)

- decent used pedal box ($75)

- blinker switches, headlight switches and wiper switches ($20 each)

- misc interior parts (e-mail with your needs)

- stock drive shaft ($50)

- big aluminum bumpers ($40 each)

- front wing windows, with frames ($50 each)

- Stock 4 speed transmission ($75)

- Stock differential ($30)

- Navy Blue front door panels. Good condition, no speaker holes, chrome mylar peeling. ($70 each)

- All upper (beltline) chrome trim (pretty good condition) ($150 for all)

- All lower trim (pretty good condition, might be missing 1 or 2 small pieces) ($150 for all)

- Rocker molding (pretty good condition) ($35 each, which includes gaskets)

- miscellaneous shifter parts

- stock axles (with cv joints) ($15 each)

- Weber 34 ICH carb, unknown condition ($40)

- 1976 thermal reactor (cracked in a couple of places, but weldable ($20)

- Square tail lights ($10-$40, depending on condition, I have several)

- Red and Amber side markers (Lenzes and entire assemblies, let me know what you need)

- black plastic grills ($75 for the set. They are like new)

All parts are located in Felton, 6 miles from Santa Cruz. I work in Palo Alto and San Jose, so parts that are easier to carry around can be picked up in either of those locations.


Last edited by bergie33 on 10-24-05 01:48; edited 2 times in total