Search found 835 matches

yea i have removed the spark plugs... i did that as soon as i got it and poured gas into the cylinders (didnt really understand why but thats what my friend told me to do)... i know it has a blown hea ...

Hey, Has anybody out there ever done a 524td engine transplant in a 2002? I was thinking this might be too heavy but its way sweet.

lots of people have done an M20 engine swap. the M21 is very sim ...

I'm working on developing my AFR table. any one care to share what they've come up with this far?

I'm actually looking at running the car pretty lean during cruising.. like 16-17:1 or so. But I wan ...

Are you sure the LC1 is getting voltage WHILE starting? Some 12v sources go dead when the switch is in the start position.

John

Yeah, during my troubleshooting that was my concern, I ran a wire ...

Ran a thick ground for the LC-1, it was rebooting, probably picking up ignition noise. Grounded the MS, LC-1 and gauge the the same point. All better.

Woohoo no hail damage on the 2002. Cant say that for some of the other cars in the neighbourhood though.

That sucks!!!

Hope it turns out ok...

Maybe you are using up all your bad luck and the rest of the year will be easy sailing... :-)

Sorry to hear about it.

-Jason

Thats what i'm hoping ...

Of course my 2002 was parked outside. I haven't driven the car in a year, first kids hit it with balls and dent it now this.

F$#@%$#%$T!!

http://www.alberta02.com/albums/My02resto/IGP7457.size ...

Try hooking your 02 sensor up to a relay lead coming out of the fuel pump power from the MS system, that way if the motor is not running the 02 sensor won't sit there burning away.

TK

When I fir ...

I have mine wired to a 12v switched source, I think from an empty terminal on fuse number 10. I presume you are giving the LC1 sufficient time to warm up? Mine generally doesn't give an accurate readi ...

I'll have to look when I get home. Have you calibrated the sensor yet?

Yeah, its calibrated. I am thinking that the starting current might be freaking my LC-1 out a little bit. My external gauge a ...

I have mine wired to a switched 12v source. No relay needed.

I have mine wired to that "green wire" under the hood, which is a switched 12v source. What source did you use?

Hey, I just got an LC-1 and have it all wired in. all is well, however when I start the 02, it seems the LC-1 shuts off or displays a static af ratio. Probably a wiring issue. So question is, where di ...

I could care less if Hussein got a good rate or not..double standard libs. Save the whales....it's about the Children...yeah right. Go cry to your do nothing congress. bitch bitch bitch

As I sai ...

Sen. Chris Dodd (D), chairman of the banking committee got a "VIP" loan treatment form Countrywide....Can you imagine if this happened to a Republican? Panting and heavy breathing would have been the ...

Yo Yo-

Sure, thats during the explosion, what about after???

Being Dutch I cannot help but liking any orange outfit.

Ik ook! Lang levende KNVB!

http://www.alberta02.com/albums/slash02/Fri_13_Jun_2008_14_56_34_MDT.jpg

Damn guys, you going to start dressin like that you will have to trade the 02s in and get a caddy el-dorado and some gol' teef.

http://www.alberta02.com/albums/bmw2002/IMG_0193.jpg

Hey everyone. I'm curious now... Is there anyone running megasquirt with a 316 cam and actually using MAP? I would think that idle would be too "pulsey" to give a reliable vac signal? Do you guys say ...

One time.. in band camp...

Jeez, I have a high output amp coming in from BNR parts that I bought off ebay. It's the 80amp variety. Will I have to do this as well?

Thanks - Andrew Poon

Btw, my car is a '76, with no mods ot ...

So the car was running on megasquirt and I fiddled with the wire coming from coil negative and now it only runs for a few seconds at time. I am having bad noise issues and I was wondering if there is ...

what is a decent sized diode, meaning #- or whatever nomenclature used for diodes...

1n4004 will work.

They would need to be doing something stupid to summon my lights in the first place!

Im always aware of my surrounding and other drivers so im always concerned about driving safety :)

I got them ...

....... Just another airhead. :)

1983 BMW R65 Cafe Racer 1974 /6 Engine w/R90S Top End, Dellortos w/velocity stacks, running without crossover, drive shaft from SWB /5, 32:10 smooth case final driv ...

sot: are all of you using the 318 manifolds, or has someone gotten creative with the intake side?

p.s. if i go this route I'm using the stock front mount off of my viggen seeing as it's been upgrad ...

Jacks Pics..

http://www.alberta02.com/albums/Karelsah02/IMG_1008.sized.jpg

http://www.alberta02.com/albums/Karelsah02/IMG_1009.sized.jpg

http://www.alberta02.com/albums/Karelsah02/IMG_1010.si ...

Mine is in the front left corner. It's a neat little package. It is much smaller than Pat's, but I'm running 6.9:1 CR and 8.5# boost. It required moving the battery to the trunk, which I like on '02's ...

This is also why I'm such a huge anti- fan of the
'fantastic new Hydrogen Powered BMW 7!'

t

New? They had a hydrogen powered E23 in the 80s.