Search found 84 matches

What fuel pump are you using? It may not have enough fuel volume. I had this proublem a long time ago with one of those ticker pumps it had the preasure but not the volume at high speed it was starvin ...

I run 50mm carbs with 46mm chokes in a race car but in order to run big carbs you must have a least a 316 shrick cam a ported head a big header 1 3/4 tubes and at least 12 to 1 pistons or you will jus ...

I have had the pleasure to race with Paul Newman many times over the last 10 or so years or should I say point him by in his GT-1 car I am no contest with my GT-3 car. He's a real gentelmen on and of ...

Ouch, open the link and look at page 12.

The 284 # is the duration or the amount of time the valve is open. 9.5mm is how far it opens the valve at zero valve lash. So the Korman 300 cam is a more radical cam even though it has less valve lif ...

The Jaz tanks are nice.

http://www.jegs.com/i/JAZ/547/605-025-01/10002/-1

This is the stuff that will stop the squeak put it on the back of the brake pads
John

I like to stop, The best brake pads I have ever run are Performance Friction. Zero fade the hotter they get the more they grab and the last and they don't eat roters they are simply amazine I run the ...

This is the realy hot set up 8mm to 6mm step studs it has a 10 mm head on the nut I used them on my exhausts header flanges but they could be used on carbs too a small tube could be cut to fill in on ...

Good driving, your car is hook up good and it looks like a realy fun track.
John

This is a Tilton custom built BMW M10 starter off my GT car it has only one season on it. Its in mint condition and works realy well it was designed to ture over a small block chevy so it has pleaty o ...

UPS is the way to go. Make sure it is drained of fluid.
John

This guy on ebay has some stickers.
John

http://stores.ebay.com/Rogers-tii_Decals-and-Stickers_W0QQcolZ4QQdirZ1QQfsubZ13165607QQftidZ2QQtZkm

http://search.ebay.com/search/search.dll?from=R40&_t ...

Hi,
I don't know if you noticed the center track rod in your photo in back of the sub frame. I welded little flat plates or wings near the ends to keep it from bending it was driveing me crazy I kept ...

Hi Chris,
What are you getting for $3900 what cam,duel valve springs,portwork,carbs, oil pan,stock rods, pistons etc ?
John

Hi Jack,
DCOE's do not but they are pressure sensitive 3 1/2 to 4 lbs no more.
good luck
John
PS Jack I live in Framingham not far from you call me if you want.
781-248-4945

Hi, I still have this engine it's a good one I thought I had a guy that wanted it but.... With a good ignition and a header this engine made 158 HP at the rear wheels thats over 170 at the crank.
Joh ...

The sway bars are available in many different wall thickness the bar I ran was a .125 wall but are made in .88 .95 .125 .188 and .250 and maybe more. the bar tubes only list for $125 each
John

One day I woke up and said this does not work. The stock set up does not move with out binding so I got some rod ends 3/4" inner a peice of theaded tubing from Coleman racing products some 5/16 steel ...

I made the changes on this sub frame it's out of my tub car GT-3 car it's a one of a kind It worked realy well.
John

Hi Russ,
Why will it not fit ?
John

Hi,
I agree with Todd on the camber but the front should be toe out 1/16 to an 1/8 so it wants to turn. In the rear you want 0 toe to 1/16 toe in or it's not going to want to roll with ease.
John

This is a nice car I have seen it many times It's well maintained and fast.
I have no affiliation with this car
John

http://cgi.ebay.com/ebaymotors/ws/eBayISAPI.dll?ViewItem&item=280223840058&s ...

Hi Alp,
I have to find a box, I'm sure it's over size and the box will weigh twice as much as the fender. I will try to find out tomorow.
John

Hi,
I only have a left front fender, the set I can get can not be broken up. Korman still sells the fenders I think there around 150 each. If you want my left for 100. you can get the right from Korm ...

I don't have a link I wish I did. I just have not had the time I spent the day installing a new mini mini alternator to replace the old mini altenator. I still want to install a pump, filter and coole ...

I still have the front fender and a freind of mine has a new full set. He wants $600 + shipping for them the air dam is cracked but repairable.
Call me if you are interested.
Thanks
John
781-248-4 ...

What do you want to see? There are a few photos of my car back in my first posts.
Thanks
John

I got the new pads from Pure Perfomance they look great I am looking forward to running them soon. I will keep you up to date, hopes are high.
John

Hi Moe,
I would go with 4.44 or 4.45s the 4.27 you are looking for are realy rare and it's less than a 5% change from your 4.11s the 4.45 are about 8.4% change you will see a differance.
John