Search found 75 matches

hopefully I will have the engine back installed in a month.

http://i7.photobucket.com/albums/y287/beammmer/Inka%202002/IMG_4096.jpg

http://i7.photobucket.com/albums/y287/beammmer/Inka%202002/IMG ...

Resistor plugs. Thanks, Don

http://www.bmw2002faq.com/component/option,com_forum/Itemid,50/page,viewtopic/t,308378/highlight,/

hundred. It is undergoing engine work, will need suspension work and some other odds and ends but other wise in great condition.

http://i7.photobucket.com/albums/y287/beammmer/Inka%202002/IMG_3759 ...

In the head $500. Block should be around 3 - 400. I hope.

Picked up my reworked head today. By appearances they did a good job, at least it's nice and clean. Cant wait for the next step. Don

Before
http://i7.photobucket.com/albums/y287/beammmer/Inka%20 ...

and the filter was still attached. I guess it was just oil left in the pan and filter, it surprised me as to how much came out. Well anyhow now I can start with 100% fresh oil and do a complete oil ...

3M 80 Rubber and Vinyl adhesive the adhesive is neoprene based giving the adhesive a heat resistance of over 200F. This is all important in attaching headliners and other interior vinyl parts. The S ...

I flipped the engine over on the engine stand to get at the oil pan. When I did so a lot of oil came out the ports. A lot meaning probably about a pint or more. My question is even though I thoroug ...

in December via DAS. My comments are on this link:

http://www.bmw2002faq.com/component/option,com_forum/Itemid,50/page,viewtopic/p,496497/highlight,/#496497

here they are. Thanks to all for the help. Don

http://www.bmw2002faq.com/component/option,com_forum/Itemid,50/page,viewtopic/t,299991/highlight,/

reply's. It makes sense they are for the A/C. It's interesting that except for the holes, there is no indication of A/C. I guess the car could have been made for the A/C and it was never added at t ...

after the engine was removed for rebuild I discovered these two holes. They go straight through the firewall, the carpet can be seen inside. Does any one know what these are for? They were not on m ...

these two parts along with another I have not retrieved yet. The small one appears to be part of a valve seal. The other with the hole is finely machined and looks to worn as if a bolt was holding i ...

do you know a source for the viton ones?

at the dealer, it's really inexpensive for the correct ones.

the machine shop told me to get new valve seals. I have an e12 head. I have found a few different versions, Bavauto, Dealer and AZautohouse. I'm inclined get the ones from the dealer, any suggestion ...

to replace the existing tranny mount. When I removed the transmission the PO had the large black mount in place. Is there a reason for the larger diameter black mount? Or, is it a case of what was ...

but I bought one of these.

http://cgi.ebay.com/ebaymotors/ws/eBayISAPI.dll?ViewItem&item=330239243298&ssPageName=MERC_VIC_RCRX_Pr2_PcY_BID_IT&refitem=330233924251&itemcount=2&refwidgetloc=closed ...

one of these on ebay, from the same guy. Fingers crossed it works or it will be back on ebay.

washers similar diameter to take up the slack.

I'm not familiar with the park. Unfortunately my car is on blocks ready to remove the engine for a rebuild. Hopefully it comes out next weekend. Let me know your schedule at beammmer@bellsouth.net

I am doing this exact project. I have tried several types of adhesive removers from 3M. The adhesive on my car has become dried up and solvent resistant due to its age and the bake cycles of a 35 ye ...

mine up at Auto Zone.

from the bay area to New Orleans via DAS, I got the name from ebay. http://das.ebay.com/ They where very honest, nice and straight forward. The car arrived a day sooner than they quoted, it was pr ...

stud bolts stripped in the cylinder head. This is the first time I taken off the cover since owning the car. Please help with repair options. I've never used Helicoil before, is it an option? Tha ...

or replace the under hood gaskets designed to channel fresh air through the cabin?

let me know when you get here, hopefully my car will be back together. I'm pulling the engine, starting this weekend, to change all the gaskets and clean up the oily engine bay.

I remember you me ...