Search found 123 matches

I put my sunroof seals on with Wurth rubber glue and some of it has dried on the top of the felt and it turns a brownish color. Anyone have a trick to take this stuff off, or am I hosed and need to re ...

Hey Guys thanks for the concern, I live in Chino right next to Chino Hills. It shook hard but since the houses are fairly new and not made of bricks there not much damage. You'll probably see store sh ...

Need the driver side seat rails, the ones that have the bend tab in the front.
Thanks

Just took mine into North Hollowood Speedometer for a full rebuild. Only issue is it's costing $140 but it will be like new.

Henry, they did do my bumpers and front over riders, came out sweet. Check the pics, good price too. l'll get the address to you tomorrow when I pass by their place.

The place is called Millennium Plating in Ontario Ca. Here's the deal guys, he's a small shop near my house that does a lot of local work. Unsure if he would do work and send it back. If you guys want ...

I had mine done. What my guy did is strip the whole blade and then chrome the whole blade. Only the part that has the knurls gets chromed, the rest of the blade is stainless. The chrome doesn't stick ...

La Jolla Independent
http://www.bimmerdoc.com/parts.php?part=59

Anyone know where to get a new brake booster or is the rebuilt one from Ireland the only one available.

Vincent I have 2 black fornt seats, and I'm in Chino. $75.00 just need a little cleaning, but they have no rips.

Thanks for all the insight guys. The pedal box was completely rebuilt also but I may need to relieve pedal pressure on the booster. I'll tinker around with it this week.

I did the whole car myself ...

Car has just been redone from the ground up. New pads, new calipers, new stainless lines, new MC. The only thing that isn't new is the booster and the check valve. Also like I said when I disconnected ...

So I'm driving around this morning and the brakes started grabing without putting the pedal down. Pull over and the front brakes are smoking, both of them. Pedal was hard, I lossened the vacuum hose a ...

So I checked this morning because I was going to buy a set of visors, go to order them this afternoon and the prices were $70 bucks more. First gas now Vinyl.

Ronin Autowerks
621 W. Valencia Drive
Fullerton, Ca 92832
714- 526-8100

Rusted Rods is always at the Pomana Swap meet and it happens this week. They have a tent between the Porsche and General area by the ATM.

Artistic, carpet wasn't hard, Al did a great job when it was made. Glued right in. Floor Mats are from Cocomats.com, expensive but definitely worth it.

Thanks Blunt, yeah I did a lot of steps over because I didn't like the way it looked or fit the first time, including the headliner.

Carpet came from Al at Seams Perfect, Door Panels and Seats were done in a shop down in San Diego.

Ok so I need to get a couple of tweaks done, get the bumpers rechromed and get it to the DMV for check, but it runs strong and feels great. Here are some pics.

I'll use a pic that CD posted back when. Look at the front bumper, thats the type of over rides I'm looking for.

They look like these. Condition doesn't need to be great since I'll be getting them and the bumpers rechromed.

Thanks for the feedback and C.D., Thanks for the pics and the detail. Should be able to fix from here.

Thanks

So I got the car together and everything works except my running lights. Have reverse, brake, blinkers, headlights and hazards. What I cant get going is the running, dash lights and I also have no hi ...

http://www.wurthusa.com/project/en/topnavi/home/startpage_1.html

No haven't done the side draft conversion. The distributor was recurved because it had the vacuum advance and I didnt want it on there anymore. I redid my motor with a ported head and a 292 so the rec ...

Ronin did so work for me, recurved my distributor. Service was outstanding and he's a great guy. I would trust him with my car, not only because what he did for me but also after seeing some of the ot ...

Here mine from cocomats they look awesome with the tan interior.

I have one and I'm located in Chino. $110.00 is what I paid, I'll let it go for that.

Yeah well, rebuilt head, and a new gasket on a glass beaded valve cover. Headwork was done by the same guys that do IE's stuff so it's straight. May try a crush ring or something comparable. Thanks