Date: 4-23-07 02:14 From: E9 Subject: Will a E30 engine fit?
First off, I'd like to say Hi. I'm new to this forum and '02's.
Two months ago I hit black ice and spun my '86 325es off the road. The frame and much of the sheet metal is twisted but the motor and I survived with nothing more than scratrches. The engine is almost new- replaced less than 30k ago.
My Question(s) for all of you are;
-Can an E30 motor be made to fit a '76 02? If so, are there any wright up's for this conversion?
- Are any of the 325 parts useable on a 2002 aside from the wheels?
This may have been asked already if so, My bad! but I did search 1st.
Thanks in advance for any and all help. Cheers _________________ New to 2002's but Not BMW's
Date: 4-23-07 06:56 From: PSloan in Houston, TX Subject: Re: Will a E30 engine fit?
The motor will fit but you will need to cut the nose and find a 323i speed to mate up to it. Also, I wouldn't waste my time puttinh an E motor into it unless it had I pistons and rods. _________________ Patrick Sloan
67 1600
90 325is
04 Audi A4
Date: 4-23-07 07:01 From: Mars in Pennsylvania Subject: Re: Will a E30 engine fit?
Hey,
Welcome to the madness!
In short - yes. An M20 (small E30 6cyl engine) conversion is relatively common on 02's. There are several write-ups out there on the web if you look but I can give you some info here:
You'll have to make some mods of course but it will work.
Not too many other parts will fit from an E30. Some folks put the Recaro seats in 02's but they tend to sit kind of high.
Date: 5-22-07 06:31 From: Biscuit3 in Sydney, Australia Subject: Re: Will a E30 engine fit?
PSloan wrote:
The motor will fit but you will need to cut the nose and find a 323i speed to mate up to it.
Why cut off your nose to spite your face? No pun intended, haha! _________________ "It's what you feel, not what you ought to. Reasonable and sensible."
Date: 5-22-07 08:30 From: incrETAble in Woodbridge, CA 95258 Subject: Re: Will a E30 engine fit?
instead of using the I crankshaft and pistons/rods, you can use the 88 325e/528e rods and pistons and crankshaft that strokes the engine from 2.5 to 2.7 and you still have the same piston top design but with more torque.
Forum Help
Forum Search
Register
Log in