Couple quick questions; do you recall the name of the epoxy? With the roll bar are you going to be running a back seat and are you having to cut the seat to squeez it in?

Car is looking amazing by the way.
_________________
1970-resto/mod =money drain
1973 Charmonix, mhh clean

GO COUGS

No, I'm sorry I cant remember the name of the epoxy. I think it was a 3M or Dupont product but I could be wrong. I remember Todd (the body guy) saying it's what they glue new cars together with. Specifically the carbon roof on the new M6. I asked if it will crack? He said the flare itself will break apart before the bond will break.

As far as the roll bar. As far as AutoPower says you can run a rear seat. I would assume trimming the seat would be required. No I'm not running a rear seat. When I ordered my wool carpet set from Al I got the rear seat delete kit too.

Thanks for the comments.

John
_________________
I suggest you sit down and dedicate a couple of hours to this thread. OOPS! NEW LINK! TRY IT NOW
http://forums.vwvortex.com/zerothread?id=2224141&page=1
#1665778

70roundtail02 wrote:

Couple quick questions; do you recall the name of the epoxy?

Try looking up 3M automix Panel Bonding adhesive. If your local auto paint supply store doesn't have it and you want to buy it locally. You can try a Volvo parts counter. They have one also that they use to bond the roofs since the 90s. Volvo part number 759938-001, but you may not be able to use it in all the two part expoy guns on the market since the tubes are a bit smaller.
_________________
~Henry Hsu
'74 2002 Tii Golf Vin# 2780100

wonderful help guys
_________________
1970-resto/mod =money drain
1973 Charmonix, mhh clean

GO COUGS

This sounds like the stuff.....I have to bond my flares soon.

http://solutions.3m.com/wps/portal/3M/en_US/3MAutomotive/Aftermarket/Products/Product-Catalog/?PC_7_0_53BC_root=GST1T4S9TCgv&PC_7_0_53BC_output=html&PC_7_0_53BC_bgel=M1MQQDCT0Hbl&PC_7_0_53BC_gvel=P14FZGJL4Zgl&PC_7_0_53BC_vroot=GSLPLPKL4Xge&PC_7_0_53BC_node=GSNCT3JT87gs&PC_7_0_53BC_theme=en_US_aad_portal&PC_7_0_53BC_command=CustomizePageHandler
_________________
Mike
77 930
74 2002

That is the stuff being used by my body shop to attach my flares. Check with a local autobody supply store to see if they will loan the mixing gun to use it. My local one let us borrow one for a small deposit.
_________________
~Henry Hsu
'74 2002 Tii Golf Vin# 2780100

Bump for a small update.

John
_________________
I suggest you sit down and dedicate a couple of hours to this thread. OOPS! NEW LINK! TRY IT NOW
http://forums.vwvortex.com/zerothread?id=2224141&page=1
#1665778

Bump for a small update

John
_________________
I suggest you sit down and dedicate a couple of hours to this thread. OOPS! NEW LINK! TRY IT NOW
http://forums.vwvortex.com/zerothread?id=2224141&page=1
#1665778

Since I painted the block last week and then went to work. I got back last night, and tonight, went out to diner with some friends. During diner, my friend asked what was going on with the o2? I told him that last week I painted the block Colorado. When we got back to the house, he asked to see it and I took him in the garage. WOW! THATS NOT COLORADO! I said as I looked at it. Man was I way off!. The block looks pink next to the car. Ug! I have to deal with this before it gets too cold to paint at all. I can have the shop mix Colorado in enamel. Do you think that will stick to the POR15 engine enamel now that it's dry?

John

_________________
I suggest you sit down and dedicate a couple of hours to this thread. OOPS! NEW LINK! TRY IT NOW
http://forums.vwvortex.com/zerothread?id=2224141&page=1
#1665778

I had a buddy of mine paint his chassis with por-15 then spray it with another paint. I will give him a call in the morning to see what he did and see if he has any tips suggestion.
_________________
~Henry Hsu
'74 2002 Tii Golf Vin# 2780100

Harv wrote:

Do you think that will stick to the POR15 engine enamel now that it's dry?

I researched painting over POR-15 after I finished my trunk. You have to knock down the sheen on the POR with sandpaper/steel wool or somesuch in order to give the new paint something to grab onto. If you paint while the POR-15 is still drying, you don't have to do this, but I'm assuming your block is dry.

I decided to leave my trunk POR-15 black after researching it... but a block would be much easier to sand than a trunk.
_________________

click signature above for my resto blog

This is the procedure he did to paint his chassis. Sand the por-15 after it was dry with a green scotch brite pad then painted it with Por-15's tie-coat primer, he sprayed 2 coats of the primer waiting 24 hours between coats. After 24 hours he sprayed PPG omni ontop of the tie-coat. Said he has not had any problems with chipping or flaking. He said you might want to give por-15 a call and see if the tie-coat is good for higher heat application as his chassis doesn't see much heat except by the mufflers, which he has not had a problem with.
_________________
~Henry Hsu
'74 2002 Tii Golf Vin# 2780100

Thanks. I'll try the sand paper, clean and paint deal.

John
_________________
I suggest you sit down and dedicate a couple of hours to this thread. OOPS! NEW LINK! TRY IT NOW
http://forums.vwvortex.com/zerothread?id=2224141&page=1
#1665778

hey john, how far are you from indianapolis? i want to come for a visit once i am up there... ;)
_________________
-Rob S.

\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\
))) www.jennaishealed.org )))
////////////////////////////////////////

Rob,
I'm just east of Cleveland Oh. I think that's about 5 or so hrs from there.
SOMEDAY when I get this thing on the road, maybe I'll get down to hook up with the Dayton guys.

Painted the block with Colorado today.
Painted the lawn mower too.



I added this pic to the original post too.

John
_________________
I suggest you sit down and dedicate a couple of hours to this thread. OOPS! NEW LINK! TRY IT NOW
http://forums.vwvortex.com/zerothread?id=2224141&page=1
#1665778



Last edited by Harv on 10-31-07 07:50; edited 1 time in total

The block AND the lawnmower both look HOT! :)
_________________
-=Scott=-
My Short Bus

1971 2002 - "William Grover-Williams" - Track/Weekend Car VIN 2579197
1998 740iL E38 - "Blau" - Daily Driver
http://gallery.xfiler.com

i nominated you! nyah nyah! thats what you get for kicking arse! :-p

http://www.bmw2002faq.com/component/option,com_forum/Itemid,50/page,viewtopic/p,476225/#476225
_________________
-Rob S.

\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\
))) www.jennaishealed.org )))
////////////////////////////////////////

where did you get new heater blower motor?

fast2002
Atlanta