| |
|
Date: 2-6-06 12:15
From: Tommy 
Subject: Goodfellas Project  
|
|
Hi guys, this is Goodfellas Project. Target to be on track in the beginning of may 2006. Earlier phases of the car can be seen on my web page http://personal.inet.fi/cool/grt
Here's links to my previous posts as a start of my project thread.
http://www.bmw2002faq.com/component/option,com_forum/Itemid,57/page,viewtopic/t,265644/
http://www.bmw2002faq.com/component/option,com_forum/Itemid,57/page,viewtopic/topic_view,threads/p,271203/t,265644/
http://www.bmw2002faq.com/component/option,com_forum/Itemid,57/page,viewtopic/t,266069/
http://www.bmw2002faq.com/component/option,com_forum/Itemid,57/page,viewtopic/topic_view,threads/p,273303/t,266069/
http://www.bmw2002faq.com/component/option,com_forum/Itemid,57/page,viewtopic/topic_view,threads/p,278111/t,266985/
http://www.bmw2002faq.com/component/option,com_forum/Itemid,57/page,viewtopic/topic_view,threads/p,278113/t,266985/
Ok, since last time I've spent quite much time fitting the fenders. They are no way near good but they will have to do. I made a mounting for alternator that is spinned by driveshaft. We'll see how that works. Then the whole body except roof was sand blasted and primed. I had that done in a local firm. Next we built a painting cabinet in the carage. Also quite much bondo work has been done although I'm not reaching for perfection. Last picture is yesterdays' situation. Floor on the outside, wheel arches, engine room and trunk were painted with industrial paint in aluminium colour. I'm still not sure if the inside will be yellow or aluminium... Outside will be yellow as before.
Tommy _________________ Racing is Life - everything before and after is just waiting!
| Description: |
|
| Filesize: |
88.71 KB |
| Viewed: |
89 Time(s) |
|
| Description: |
|
| Filesize: |
103.19 KB |
| Viewed: |
121 Time(s) |
|
| Description: |
|
| Filesize: |
98.66 KB |
| Viewed: |
98 Time(s) |
|
| Description: |
|
| Filesize: |
88.65 KB |
| Viewed: |
73 Time(s) |
|
| Description: |
|
| Filesize: |
93.69 KB |
| Viewed: |
165 Time(s) |
|
|
Date: 2-6-06 11:30
From: Tommy
Subject: Re: Goodfellas Project *painting*
|
|
Couple more painting pics. Interior is now aluminum gray. Today we'll spray yellow and the body is ready. Still all the fenders, hood, etc to go.
Tommy _________________ Racing is Life - everything before and after is just waiting!
| Description: |
|
| Filesize: |
86.08 KB |
| Viewed: |
63 Time(s) |
|
| Description: |
|
| Filesize: |
95.95 KB |
| Viewed: |
54 Time(s) |
|
| Description: |
|
| Filesize: |
87.08 KB |
| Viewed: |
61 Time(s) |
|
| Description: |
|
| Filesize: |
99.63 KB |
| Viewed: |
75 Time(s) |
|
| Description: |
|
| Filesize: |
98.93 KB |
| Viewed: |
163 Time(s) |
|
|
Date: 2-8-06 07:20
From: my73bimmer in Deerfield beach, Florida 
Subject: Re: Goodfellas Project
|
|
Nice car !!! _________________ Rolando
My73bimmer
1973 2002tii
South Florida..Deerfield Beach, FL USA
http://photobucket.com/albums/a3/my73bimmer/
|
Date: 2-9-06 11:24
From: Tommy
Subject: Re: Goodfellas Project *painting; yellow*
|
|
Well yellow it is! The shade was supposed to be same as before but it doesn't quite look like it. Maybe it's just faded over the years.
I don't have room to take better shots as long as I have that painting booth in there, but you get the idea ;-P _________________ Racing is Life - everything before and after is just waiting!
| Description: |
|
| Filesize: |
100.06 KB |
| Viewed: |
64 Time(s) |
|
| Description: |
|
| Filesize: |
101.37 KB |
| Viewed: |
47 Time(s) |
|
| Description: |
|
| Filesize: |
100.3 KB |
| Viewed: |
57 Time(s) |
|
| Description: |
|
| Filesize: |
96.74 KB |
| Viewed: |
66 Time(s) |
|
| Description: |
|
| Filesize: |
98.83 KB |
| Viewed: |
290 Time(s) |
|
|
Date: 2-12-06 07:00
From: Tommy
Subject: Come on Mitch
|
|
Thanks for all comments! Pictures don't tell all - the car no way near show quality. There is many nicer cars on this board. I'm just doing as good work as I can without stucking on one place for too long.
But really Mitch you don't have to be jellous about my carage! It's a crappy tight place and I pay way too much for it. Temperature is 8 deg C right now, not so ideal for painting - or actually anything.
But thanks guys! I'll keep you posted as soon as I get something done again.
Tommy
| Mitch wrote: | Why can't I have a garage like that?
Why can't my car look like that?
WHY!? |
_________________ Racing is Life - everything before and after is just waiting!
|
Date: 2-20-06 11:25
From: Tommy
Subject: Re: Goodfellas Project *assembling started*
|
|
Paint job is almost done. Hood and front spoiler will be painted later. So now I've started putting it back together - this is the fun part of the project when you see something finished every day.
Rear axle, rear PC windows, 1-wiper system from Fiat Uno, fenders, dash,...
It's starting to look quite much like my vision was but I'm really waiting to see it on the ground with wheels and driving height set.
Tommy _________________ Racing is Life - everything before and after is just waiting!
| Description: |
| Body without removable panels. |
|
| Filesize: |
132.31 KB |
| Viewed: |
94 Time(s) |
|
| Description: |
|
| Filesize: |
138.93 KB |
| Viewed: |
2578 Time(s) |
|
| Description: |
| Fenders installed, fronts will be still removed out of way. |
|
| Filesize: |
108.28 KB |
| Viewed: |
85 Time(s) |
|
| Description: |
|
| Filesize: |
109.56 KB |
| Viewed: |
79 Time(s) |
|
| Description: |
| 3mm polycarbonate windows |
|
| Filesize: |
100.56 KB |
| Viewed: |
63 Time(s) |
|
|
Date: 3-6-06 10:16
From: rallysmurf
Subject: Re: Goodfellas Project *assembling started*
|
|
| Tommy wrote: | Paint job is almost done. Hood and front spoiler will be painted later. So now I've started putting it back together - this is the fun part of the project when you see something finished every day.
Rear axle, rear PC windows, 1-wiper system from Fiat Uno, fenders, dash,...
It's starting to look quite much like my vision was but I'm really waiting to see it on the ground with wheels and driving height set.
Tommy |
cars awsome tommy!
i finally am getting started on my rally 02.
i like your un-iterupted door X.
one wiper setup. its going to be all lemans!
alex _________________ 1974 2002 rally car http://bcdracing.com//pics/rally/rally.html
1969 1602 parts car, need anything off her?
1984 318
2002 golf TDI "krolic"
|
Date: 3-7-06 05:05
From: TMK-001 in Geelong, Victoria, Australia
Subject: Re: Goodfellas Project *assembling started*
|
|
That looks soooo tough! Cant wait to see this bad boy finished!
Todd _________________ 
|
Date: 3-12-06 11:20
From: Tommy
Subject: Re: Goodfellas Project *assembling 2*
|
|
I got the wheels blasted and painted and suspension is now put together so you start to see what the car will really look like. It's very much like my vision was when I started this. Likely I will paint the wheel spokes/centers black.
Tires are 225/45/17 Michelin Pilot Sport 2, old ones just for testing. Most likely that's what will be used but if I end up with some other brand 215/45/17 may be an option (PSII not available in that size).
Also brakes are now installed, heated windscreen, dash etc.. Next electrical wiring.
What I'm worried about is that I'm still missing clutch and dry sump system. Both ordered from UK. Sump 3 months ago and clutch over a month now...
There's quite much work to fit those.
Also a little drawback with mainshaft. I made a one piece shaft and took it to be balanced. Thay said it can take max. 6000 rpm's before breaking, which would mean only about 150km/h. Larger diameter tube has to be changed...$$€€
Tommy _________________ Racing is Life - everything before and after is just waiting!
| Description: |
|
| Filesize: |
107 KB |
| Viewed: |
102 Time(s) |
|
| Description: |
|
| Filesize: |
108.48 KB |
| Viewed: |
100 Time(s) |
|
| Description: |
|
| Filesize: |
102.67 KB |
| Viewed: |
80 Time(s) |
|
| Description: |
|
| Filesize: |
95.75 KB |
| Viewed: |
84 Time(s) |
|
| Description: |
|
| Filesize: |
99.11 KB |
| Viewed: |
119 Time(s) |
|
|
Date: 3-13-06 05:56
From: Tommy
Subject: Re: Goodfellas Project *assembling 2*
|
|
Motor will be same 2 liter m10 as before. It's documented on my web page. I will add dry sump and double DCOE's will replace the Lynx + 1 carb setup.
I will change class to Roadsport B (earlier C). Here's little information about the classes in english
http://www.historicrace.fi/HARRASEE.HTM
Here's some of the competitors
http://www.historicrace.fi/CLUBCRSE.HTM[/url] _________________ Racing is Life - everything before and after is just waiting!
|
Date: 3-29-06 10:38
From: Tommy
Subject: Received some goodies
|
|
Finally got some long waited parts! 3 stage dry sump pump and tank from Pace Products UK. Alcon race clutch dia 7,25" =184mm. The disk is about 2,5mm thick, quite light I'd say. Should be a bit easier for the synchros.
Cost: "Hell of a lot more than too much!"
Since last time I have made about half of wiring, fitted oil tank, started making oil pan, almost fitted the pump and started working with flywheel. So nothing finished but alot going on.
Tommy _________________ Racing is Life - everything before and after is just waiting!
| Description: |
|
| Filesize: |
103.27 KB |
| Viewed: |
57 Time(s) |
|
| Description: |
|
| Filesize: |
101.31 KB |
| Viewed: |
49 Time(s) |
|
| Description: |
|
| Filesize: |
106.85 KB |
| Viewed: |
53 Time(s) |
|
| Description: |
|
| Filesize: |
105.29 KB |
| Viewed: |
58 Time(s) |
|
| Description: |
|
| Filesize: |
99.83 KB |
| Viewed: |
74 Time(s) |
|
|
Date: 4-11-06 10:53
From: Tommy
Subject: Re: Goodfellas Project *assembling 3* (nt)
|
|
Slow progress. That crazy expensive clutch slave cylinder is installed. Only bought it because it was the easy way. Rear end is now put together. Trunk floor is made of kevlar honeycomb sheet that's used as aeroplane floor. Piece of that size weighs about same as a postcard :-) Air can now flow quite freely from under the car as the rear panel is cut. Still some work to do with wiring. Then oil system, exhaust, cooling, etc.
Tommy _________________ Racing is Life - everything before and after is just waiting!
| Description: |
|
| Filesize: |
98.58 KB |
| Viewed: |
67 Time(s) |
|
| Description: |
|
| Filesize: |
98.75 KB |
| Viewed: |
78 Time(s) |
|
| Description: |
|
| Filesize: |
86.3 KB |
| Viewed: |
59 Time(s) |
|
| Description: |
|
| Filesize: |
102.66 KB |
| Viewed: |
78 Time(s) |
|
| Description: |
|
| Filesize: |
101.69 KB |
| Viewed: |
79 Time(s) |
|
|
Date: 5-5-06 09:01
From: JK
Subject: Re: It's running!!
|
|
Tommy,
PM no longer works so.......Can I get you to e-mail me jkestler@earthlink.net.
I have a few questions about your project and some parts you may be interested in.
JK
|
Date: 5-7-06 10:26
From: Tommy
Subject: 1st test
|
|
Well, it didn't start that well. I was only able to run 2,5 laps. I had drained battery too much and we thought alternator was bad. Actually it wasn't but that took the time. There was other problems as well but now they should be fixed for next Wednesday. I sure wish to get some more laps because it comes a bit expensive to run two laps for 50 euro track fee + 100km travel.
Tommy _________________ Racing is Life - everything before and after is just waiting!
| Description: |
| Most of miles were gained on the trailer. |
|
| Filesize: |
119.07 KB |
| Viewed: |
133 Time(s) |
|
|
Date: 5-7-06 10:36
From: Tommy
Subject: Re: Goodfellas Project *assembling 4*
|
|
Sorry that the last week assembling work was not reported yet. I got the bearings for engine at friday and worked 8 days. Not much time to take pics but here's some.
Tommy _________________ Racing is Life - everything before and after is just waiting!
| Description: |
|
| Filesize: |
90.45 KB |
| | |
