Date: 10-11-05 07:25 From: steve howe Subject: Can't slow down fast idle on my weber 32/36...
I thought it was a bent thottle plate, when I grab the linkage and lift up on it it slows down so I swithched carbs but still have the same problem. Any thoughts?? Thanks....steve
Date: 10-11-05 07:32 From: brad c-ville, VA Subject: maybe a weak throttle return spring?
i tightened my spring up when it started doing that. also, give a good cleaning to the linkage and lube the ball joint and firewall mount too. it helped with mine.
Date: 10-11-05 08:56 From: Pimpride Subject: Re: Can't slow down fast idle on my weber 32/36...
Too much fuel maybe. I have a motorcycle w/ a carb that fills up that runs fast until it doesn't flood. Maybe check your needle/float that it's not sticking and maybe lean out the carb some.
Date: 10-11-05 11:52 From: mike Subject: And while you're at it, make sure there's just a little slack in the
linkage so the throttle can return to full idle...
mike
Date: 10-11-05 05:59 From: steve howe Subject: thanks guys
I set the timing, adjusted the air/fuel mixture and lubed up the linkage and it seems fine now. Thanks for the input....steve
Forum Help
Forum Search
Register
Log in