Date: 5-9-08 08:44 From: justinevert Subject: HELP!! Need Oil Cooler/ Filter Sandwhich Part
Was sold everything for an oil cooler except THAT, I believe it is 3/4" with 16 thread.
I'll take a leap of faith and see if anyone has one like HKrix. If not where can I get one, I have tried Summit but it does not seem to be the right one. And I can not get anyone at customer service.
Justin
Date: 5-9-08 11:05 From: bmw1602.com in Los Angeles Subject: Re: HELP!! Need Oil Cooler/ Filter Sandwhich Part
they are available at any rod shop or places like summit.
you need a mustang one. you got the size right.
these are readily available..... _________________ 68' 1602
98' ///M3 Sedan
Date: 5-11-08 08:40 From: ncoonen Subject: Re: HELP!! Need Oil Cooler/ Filter Sandwhich Part
The one on eBay has fairly small (3/8" NPT) inlet and outlet ports for the oil lines. If you need serious cooling, try the Mocal SP-1 or SP-1T (includes a 180 degree thermostat). These have 1/2" fittings for 10-AN lines.
I have a Mustang that needs an enormous oil cooler so I know a bit about these. Note that the Mocal plates have BSP threads so buy the correct AN adapters from RPW so you don't risk a leak.
...ned.
Date: 5-17-08 06:56 From: kbmb02 in SoCal Subject: Re: HELP!! Need Oil Cooler/ Filter Sandwhich Part
I've got an oil filter / cooler sandwich plate (coming off an M10 race engine) if you're interested.
Forum Help
Forum Search
Register
Log in