Hi all,
I'm assembling a 02Tii engine for a friend that did the disassembly, and I a little concerned with the way the pressure relief valve is going together.

I have assembled it as the manual shows, but there seems to be about a 1/4 of slop before the spring has tension (with the engine upside down on the stand, I can pull up on the little tube a 1/4" before it tops off on the retainer).
Most valves I have dealt with in the past have a bit of spring tension at all times, if not a good amount.
There was not spec on it in the manual that I could find.

Any help prior to dropping the engine back in would be great. I'd hate to have to tear it apart while it's in the car.

Thanks
_________________
Alan Petersen
http://impfected.blogspot.com/
Seattle WA.