Search found 624 matches

the housings are burnt...I can't read anything on them and the bulbs aren't coming out easily...

1156 for the brake lights and turn signals but there are smaller ones in the driving lights and reverse lights...I can;t make out the number on them.

What are the bulb sizes and wattage for a square tailight.

voltage regulators
altenators - one from my 1974, and the other is the upgraded one from 320i with bracket (never installed or used)
shifter bushing items
ashtray
used distributor cap- works fine ...

I need 2 tail light lenses and the assemblies for the both sides of a square 02. No cracks- decent condition please.

is there a way to hot wire the wiper motor to a toggle switch...I know the wiper motor is good and need this quickly to get by until I can dig into the issue?

I need the fuel/temp gauge from the instrument cluster for a 1974.

I need an update on this one!!! LMAO!

yes. That is how I did it.

+1 for the ie plug wires

Can I be on the list for the next one you give away? I will respect your property!

I like the black on black look preferably. I did put the jute (carpet padding) under mine for sound deadening and better wear on the carpet.

Yeah- it is a labor of love thing. There will always be something to tinker on (read as- break and fix). I have to remind myself it is a 30+ year old car and will have it's hiccups, but getting it to ...

which one? HAHA!

Problem: many electrical issues- Fix: replaced entire wiring harness, removed stereo wiring and removed aftermarket gauge wiring

Problem: Not Charging- Fix: removed voltage regu ...

A BIG THANKS to those of you who helped with answering the multiple wiring, starting, and general questions for the past few months. I drove my car successfully to the office and back- about a 100 mil ...

I redid the rear deck out of very stout cardboard and covered it in carpet and made sure that the new deck extended out to fill in the gap.

There are stock tabs that hold in the top part of the bench seat. When I cut the backs of the 6 series seats for my 02 I was able to use that tab to hook into the back fiberglass of the 6 series seats ...

It does shut off when I remove the blue wire to the alt. So I will take your suggestion and place it there. Will there be any chance that it would burn up the diode from the amps coming from there, co ...

I posted this a while back and put the diode in line with the Blue wire going to Pin 12 on the instrument cluster...but that must not be the wire that goes to the charge light. Can someone tell me the ...

The solid blue wire that goes to #12 on the plug into the back of the instrement cluster should have the diode put in line?

I just finished replacing all the wiring- from an electrical smoldering- so no PO wiring now exisits!!! This wasn't and issue with the old/original altenator- just the new 80 Amp. I'm hoping the diode ...

How did it get messed up by replacing an altenator? Is the diode the solution, or just a patch. Is there another way to remedy the situation? Will this cause a drain on my battery?

I have a IN4003- will that be sufficient, or do I need the IN4004? Just checking before I go out and buy one.

what is a decent sized diode, meaning #- or whatever nomenclature used for diodes...

do you still have the glass? I have a 1974 bimmer. don't need the windshield or rear defroster glass. just the window glass all the way around. willing to ship to 37188?

So I upgraded the altenator from the stock 45amp to an 85 amp altenator. Got the Blue cable (D+) that went to the factory harness plugged into the D+ on the new altenator. wired B+ and ground, and now ...

how much... email me vintage_car at yahoo dot com

sent email- need intermittent wiper switch.