Search found 78 matches

Sounds like the camshaft may have been the problem ??
Petrol here (australia) is about $1.80 per litre with diesel almost $2 per litre. Ouch !!!!
Mal.

Am i right in assuming that the 2 long bushes go in the mounting part and the 2 short ones go into the adjuster/tensioner mount ???
Mal.

Does anyone know where/who sells Urethane/delrin alt bushing AND does mail order ??? also do the e21 alt use the same bushings ??
Thanks,Mal.

Just use an after market one.Plenty around.Ask at a brake specialist.
http://www.hydroboost.com.au/there_are_two_main_types_of_brak.htm

Mal.

Thanks very much for your help !!
Mal.

I`m about to put all new poly bushes in the rear of my car.I have bought the camber and toe adjustable bushes.Which bush do i put on which ?? Does the inner bush adjust the camber or the toe ??
And c ...

My father had a line burst on a single line `63 ford falcon.Just lucky that no one was killed.
I think the twin line BMW system works like this(at least the RHD ones); The front part of the master ...

I plan on `improving` my single line system by adding a dual line master cyl.The front 1/2 of the MC will operate on the original front calipers and the rear 1/2 of the MC will operate the rear brakes ...

I`m about to put all new poly bushes in the rear of my car.I have bought the camber and toe adjustable bushes.Which bush do i put on which ?? Does the inner bush adjust the camber or the toe ??
...

Thanks guys.Using the corect word to search with sure helps.
Found a VW guy on ebay selling them cheap,$29us. Total is around $42au landed here.Not too bad really.
Thanks again,Mal.

Anyone know where i can mail order (to Australia) a carby syncronizer/balancer ?? NOT manometer type
Thanks,Mal.

My engine was leeking oil out of the Timing/cam chain tensioner screwed plug.I unscrewed it to see what was up.A whole lot of oil came out and the spring and piston.
When i re asembled it and star ...

Looks great.What is the story behind the adjustable castor (strut) rods ???
Mal.

What`s your email address ?? Are they the IE ones ?? How much,ect.
Mal.

I just bought a 2002 sight unseen that has rear fender lips custom made from body filler !! If i fitted turbo flares from IE,how much could i cut out of the metal/filler fenders ???
Also does anyo ...

Pull your new air box/filter setup off and see what happens.At least then you`ll know there`s nothing wrong with them !!!!

definately not a NK,i own 3 of them....looks like a E3 to me

That is how they are supposed to be.That stud also holds down the water outlet neck... All is OK.
Funny how only the middle 2 cylinders get water heating !!!
Mal.

If the car is lowered 1 inch should we use a 1 inch spacer ?? Or it`s not that critical to keep arms at original angle ??
Mal.

Hey Harv,what pistons are you using and do you think any M10 will go to 92mm ???
Mal.

On internal regulated alt like yours the charge light IS needed.The current running thru the charge light also runs thru the alt and `excites` the alt to start it charging.OR as you have found out if ...

I know a guy here in Aus that has spent $50,000 just buying parts (all new) for his 2000Ti NK sedan. He was recently quoted 25K to do the body/paint.. When he is finished he will have a car worth may ...

I have a 7/77 320i that has solid discs.No idea if it came like that from the factory or not.It also has 5 speed which i believe is non factory.The car is RHD and being in Australia probably Euro spec ...

Does anyone know of a cheap and easy or proper way to alter the camshaft timing ??
I`m sure i saw somewhere an idea where you drilled oversized the locating hole in the cam sprocket and fitted an ...

I reckon that baby was safer in Steve`s hands in that croc pen than the average baby would be in its car seat with it`s mother driving !!!
Mal.

Could the valve springs be going coil bound ? Or the valves hitting the pistons ?
Mal.

Leaking brake or clutch mastre cylinder.You will need to rebuild the old one or replace with a brand new one.As these cars are 35 plus yrs old ALL the brake and clutch hydraulic parts will be about wo ...

In my 4x4 diesel work truck i use all synthetic gear oils,which i change yearly at around 1200hrs.
I change the dino engine oil VERY regularly. (every 150hrs) After more than 9000hrs the inside of t ...

Buy plus .010" rings and file fit the ring ends for correct end gap.The bore WILL have slight wear and standard rings will have an oversize end gap.
Mal.

I live in western NSW.About an hour west of Dubbo.I`m restoring my 1967 2000ti NK sedan.I also have a 1967 1800 NK sedan parts car and an extremely rusty 1977 E21 320i 5 speed parts car.I have found a ...