Search found 67 matches

It appears the canceling thimble is too short?
Therefore, it does not make contact with the TS stud.
thanks for your reply.

Thanks for the reply.
My TS is on the left side, so 3 O'Clock position is correct.
It seems that the TS stud nver touches the ring.

Hi,
Please help!
My turn signal does not cancel or return to its orignail position after use. I thought that the turn signal was defective, so it was replaced with another used one..it did not work ...

Justin,
On the way
tks.

Hi,

Is it still available or long gone?

I am looking for front and rear for 74.

tks.

Hi Patrick,
I do need the bottom padding/foam that goes after the plastic cover.
To be cleared the plastic cover secured the top cover with four long screws just right below the steering column.
Do ...

Todd,
I do not. We were using ABS plastic with aluminum look because it was much easier to cut and it came out perfect.
Ross

Thank you Michael.
I think I will go with IE, complete kit cost $525.
Did you install it yourself? Was it difficult? I am not to mechanically incline so i may have my local BMW shop do it.

This may be overkill.
I think I'll stick with IE. big brake kit.
thank you anyway.

Thank you. I think I'll go with Ireland Engineering as you had suggested. Spoke to Jeremy who seemed very knowledgeable and said IE remannufacture Volvo calipers...the whole set up (front only) is $ ...

Great help Mike, thanks.
Now I have to find those parts.

Hi,
I would like to upgrade my 74 front brakes to a larger rotors and calipers and was told that I will need a 1977 320i hubs, hub rings, calipers and of course rotors. So questions are:
Has anyone ...

ok, thanks.

Thanks for the reply.
I had it out and remembered that there was no ring or anything like that in there. What next?

Hi,
My turn signal will not return to its original or neutral position after turning?
Is this a simple fix?
thanks.

As you know restorations or any custom projects will require LOTS of time and MULA. Good luck and keep in touch.
Tks,
Ross

I'll try them thank you.

Hi,
Looking for a horn relay, anyone has one for sale {FL}?
Tks.

Thank you Todd.
It really is very pleasing to the eye.

Very nice work...now I should have gone with side draft carb...that's why project will never end. Life is fun!

All work except paint job were done by myself and a co worker who experienced has been with mobile installations. Since the post and from driving the vehicle around town, he has been busy receiving c ...

Email me your email address and i will scan diagram to you on Monday.
Ross

Hi,
Go to http://www.ignitedperformance.com/
to order the start button.
To wire it you would come off the TRUE ignition before starter wire connect to relay then from relay to start button and 12v ...

I love the work you've done. I didn't go all out like you did due to time and money. Of course most of the work were done similar to yours except totally stripped the car.
Excellent work project.

Thanks. Still need to add a subwoofer yet. When she sits still it sounds great, but when moving it drowns out most of the bass.

Thanks. Thinking about loosing the front bumper in place of Ireland Engineering front spoiler.

Previously posted under different section by mistake and should have been here instead.

This process took nearly a year with my 74' 02 since the inception. It was previously painted with BMW color ...

I had just finished custom work and restorations on mine and vaguely remembered that the two side windows do not need to come out. However, be prepared that this process is a pain in the (you know wh ...

I've tried just about every solutions out there on the market and nothing seemed to work, except it was making the chrome looking worse. I know it is a pain to take them off, send them away while wai ...

Although, I love the performance of the engine upgrades, the five speed upgrade conversion was an excellent addition and work quite well together.