Search found 430 matches

Is anybody going to the SCCA Runoffs at Heartland Park, Topeka? If so, be sure to come by the Taylor Race Engineering trailer and say Hi! I'll even buy you a beer! The guys are already there and I'll ...

I'm 50. I'd say I've owned a couple hundred cars & motorcycles. Right now I have;
'68 Honda Mini Trail Z50 - My 10th Birthday present
'74 - M20 2002 - Nick's Car
'75 Honda CB400F - Nick's bike
'87 ...

I have one from a parts car, I'll sell for a case of Shiner + Shipping.

How much Redline 75W90NS should I put in my LSD?

Just under a quart. If you are using NS fluid you might need to actually buy a bottle of the friction modifier and add some if you hear clutch plat ...

Thanks!
DP

How much Redline 75W90NS should I put in my LSD?

I FOUND THE NOISE! It was the heat sheild just in front of the diff, just barely touching the driveshaft. I bent it out of the way and the noise is gone!

I installed the trans on the engine and dropped them in throught the top. There's a TON of room to do it this way on a Z3. The thing that confuses me is there's no noise when the car is off the ground ...

Hi Paul. Would the shock mount make a loud thump , thump, thump? It sure sounds like it is directly related to something that rotates. Since the car has sat for a while I thought it might be a siezed ...

Good idea, but they are new. I was wondering if it could be a wheel bearing. Would it only make noise under load?

This is BMW related and it does have a 4-cyl engine. I just installed a new engine in my '96 Z3. I took it on a shake-down drive and there isn a thumping / scraping sound coming from the rear. As I dr ...

You're one week early! I'm taking Nick to A&M this weekend and Charlie to St. Ed's in Austin next weekend.

Thanks Dan. I looked at that, but couldn't make heads or tales of it. I think I'm just going to to a used car lot and take a look under the hood at one.
DP

I know, this is a 2002 board, but it's probably the most knowledgeable BMW bunch and the Z3 board is dead.

I installed a new ingine in my '96 Z3 and there is a single large gage red wire coming ou ...

Thanks guys. I ended-up pulling the panel next to the battery and moved the solenoid by hand and it opened-up. Thanks again!

I just bought an '87 325is and can't get the fuel door open. There doesn't seem to be a release in the trunk. I'm out of gas HELP!!!!

VW fender welting from J.C. Whitney. Like $4.50 for 25 feet.

http://www.jcwhitney.com/FENDER-WELTING-FOR-VW/GP_2008773_N_111+10210+600013119_10110.jcw

I just got back from 4-days there with the F2000 Series and the NASA Series. Very cool track. The racing was good and with 41 F2000's, lots of crashes. On Saturday we only had 3 green flag laps! NASA ...

Hi all. There has been a lot of discussion on the forum about the different types of differentials available. The following is a link to an article written by Craig Taylor, the President of Taylor Rac ...

I just got off the phone with 2002AD. I was asking if they had a 2002 LSD and they informed me that "No 2002 was ever made with an LSD." WTF? Is that right? Edit -- I thought I was right. I checked s ...

I know how to adapt a 320 LSD to a 2002. I just thought if I was going to pay top-dollar for one, that I would get one that didn't need adapting. I guess I'm going to just bite the bullet and install ...

I just got off the phone with 2002AD. I was asking if they had a 2002 LSD and they informed me that "No 2002 was ever made with an LSD." WTF? Is that right?

Edit -- I thought I was right. I checke ...

Nah.., This is TEXAS! They don't even raise the hood.

I'll have the Taylor Race Engineering trailer at UTA Formula SAE competition at UTA next Saturday and at the Autocross at Pennington Feild in Bedford next Sunday. Maybe 2002'ers could show-up en mass.

I have 2 - 2002/320 New Quaife units in stock with a lifetime warranty @ $1695 each. I also have Quaife diffs in stock for almost any other car.

Thanks!

Paul, were they stolen off the transport? Seems like they would have insurance for that.

Ok, this is way off-topic, but you really need to make your avatar smaller dude. On my 13" laptop, any post ...

Paul, were they stolen off the transport? Seems like they would have insurance for that.

Can you say "TaylorRaceEngineeringslipyokedriveshaftgroupbuy"?

I can!

Not as well as I can say "GetQuaifeToMakeSomeMoreE21UnitsGroupBuy" :)

I have 2-NEW 2002/e21 units and 10 - E30 units o ...

If you do a u joint at both the front and the back along with a slip yoke slider, you shouldn't have a problem. I have been using the same driveshaft guy for about 20 years. He has built driveshafts ...