Search found 26 matches

From the back

http://i267.photobucket.com/albums/ii307/brios_guy/EXH1.jpg

I had ANSA on the car before the Ireland setup. The tune is definitely more subtle than the ANSA, but nice, low, and throaty. I've actually gotten a few compliments on the sound. Again though, I h ...

I was able to get one bolt in. I had to remove one if the resonators due to the upward angle of my header.
http://i267.photobucket.com/albums/ii307/brios_guy/EXH2.jpg

I fifth that comment. Great guys.

You can get those inertia switches used or I use one I found at Moss Motors.
It's a pretty good idea to have one. Imagine getting in an accident, possibly being incapacitated and that pump keeps fil ...

Someone buy wegweiser a beer please.

Yes. Usually about 1/8 inch. Either notch the fan (not recommended) or take the spindle to grinder. Make sure to use good (urethane) bushings.

Great to hear! It sure is a beautiful setup once you get it on. Good luck.

Here is what I came up with. IE SS header and SS exhaust kit. I used SS scrap and a tip I purchased and donated the "S" bend. My scrap came from the removed 2nd resonator. The header fit poorly an ...

test
http://i267.photobucket.com/albums/ii307/brios_guy/EXH1.jpg

Yes sir. I has a stainless warped header from IE and in the end it cost a lot more than I wanted it to to get it fixed. I don't buy things from IE any more. My two purchases, the header and their a ...

I used Degrazia’s Auto body a few times for non 2002 repairs and they did an excellent job. My only complaint is that they used old motor oil to blacken my tires (I hate that), but they were fast and ...

I purchased two cans of Fjord blue metallic, some primer and clearcoat from PaintScratch to repaint my trunk. They were fast with the shipping and the colors matched well. The quality of the paint s ...

Will do.

Yeah, I was heading that way. I’m going to do my fan upgrade and recheck all the obvious wiring and grounds first. There is a note in the manual about older European cars and the difficulty with “vo ...

I’ve used one for about a month and a half so far. The system works good, but seems erratic. I think it has something to do with the ground/voltage stabilizer (if there is one). I’m using the origi ...

I used the non-step stainless style. My experience wasn’t a great one. The shop I had the headers installed at complained about the fit to the block, but with a little bending they got them to fit. ...

That was one hell of a nasty crash with Kubica.

I run a Spal 13 slim fan and it looked like that was the biggest fan of that type that would fit in front of the radiator top to bottom. $69 from Jaycorptech .com. It came fast and well packed.

Here’s too much information that probably doesn’t apply to tie rods.
In the aviation world where torque becomes extremely important is not accepted to under or over torque a nut to align the holes fo ...

I elected to go with 320i alternator upgrade and a fan upgrade while I was changing the radiator. I had heard from one of the first IE radiator upgrade posts that it was a close fit, but he too used ...

Yes, check your email on this site.

I got mine in using one of the square holes that the steel clips fit into next to the original radiator mounting hole. It’s definitely monkey wrenching and I would have gone with the 3 core in hindsi ...

Which raceway is that?

I need help with my aluminum Ireland Engineering radiator. The mounting holes aren’t even close to matching up. It’s the weekend and there’s no customer service. Anyone out there have an IE radiato ...

I’m in the same boat as you. I placed an order a few weeks before you did and have not received anything. I also emailed and called and got no response. I’m not going to bash the business, but I th ...