Search found 206 matches

http://homepage.mac.com/roscoeivy/web/IMG_8571.jpg

Are we all comfortable running just two nuts on the camber plates instead of four?

Ha! I love this site but 'efficient' would be the very last thing I would call it. Search options are abysmal, PM function is nonexistent but worst of all we only have ONE subforum for EVERY topic ima ...

You can order OEM lines from the dealer in any length fwiw. Its fairly cheap too. After seeing how much trouble everyone has with flaring lines for our cars, I'd rather spend my time bending. I bought ...

2.5L build this winter?

Ive asked you before but youve never responded. Do you plan on giving the molds to a shop to lay the fenders for you or are you going to do that yourself as well? If the former applies, would you cons ...

i kept up in all the corners but those E36 M3's are fuckin fast in the strights.

Are we talking stock e36m3s or gutted, cammed and coilover-ed e36m3s?

That red touring is simply amazing. Looking to sell Mike ;)?

I`m also part way through a rebuild and have gone with an ex BTCC 2.0L S14, dogleg gearbox coil overs, porsche Brembo 4 pots up front, e30 M3 steering rack , and a complete E30 rear subframe, limited ...

In bold: connections needed

01 - To alternator dash light - Cluster
04 - To coolant temp gauge - Cluster
05 - To oil pressure light - Cluster
07 - To ignition switch - RUN position
09 - To T ...

Sorry to let out your secret Blunt but I happen to know your parts business is not your livelihood and I'd like to help these clueless saps out, so I dont have to keep reading 'I got buttf'ed at the d ...

that is almost pornographic........ I have tire envy.......mine are only 205's hehe

You can fit 205s under stock bodywork. Why do you have turbo flares if youre not utilizing the extra room?

One has a side wall that is 35% the width of 275mm and the other has a side wall 50% of 275mm. Thus the difference in overall diameter.

John

Im not retarded, I understand what the numbers mean ...

the tires are 275/35R15
steve k.

Any thoughts as to why they make the equivalent R6 so tall? 275/35/15 vs. 275/50/15. 2.5" difference in diameter is huge.

S52 Possible - yes:

http://www.terrysaytherauto.com/Racing/RacingFrankIntro.htm

Somewhere in their write up, there's a movie I remember watching. If you look close, you'll see the brake fluid r ...

Interesting stuff - do you know what the fully dressed weight of an s14 is??

You mention gearbox, but also consider the diff - 49lbs for a 2002/e21 diff versus 83lbs for an e30. Didn't Paul Cain ...

More Mustang pictures please.

I'm very skeptical about those comparable engine weights though, but purely on gut feel. Wasn't someone trying to compile the definitive engine weight chart, based on like for like comparisons (ancill ...

Thanks for the useless post and picture as usual C.D.

This swap has been done. There is a S50 '02 running around on track here in TX, granted it has a lot more done to it as well.

An aluminum M5 ...

Internet myth? Well, not quite, perhaps some clarification is needed.

Check out some reputable engine builders and ask them for a quote. Then again if you rebuilt a stock 2.0 motor that was in good ...

The mechanicals on these cars require a high degree of care and the complexity means that when rebuild time comes that you cannot do it yourself and it will be expensive. The rebuild on an S14 is pre ...

So the m52 is 60lbs lighter than the m20

My plan for so long, was to have an M20 turbo,
Now that i'm ready to bolt on all the turbo stuff, i'm thinking of an M52, even eyeing out an e46 M3motor, ...

No, you can usually find them for 500-700$ if you buy them separate.

B16?? no i think i'd prefer to stick wit BMW for this one what's the M10??

Good God, do some freaking research.

http://en.wikipedia.org/wiki/BMW_2002

That's real data.

Amen, ordered a scale today. Might start a site compiling the data and pictures. Clear up all the 'I heard...'s.

I had in my mind that the alloy M52/4 was the same weight (ro ...

No offense but I dont believe the ETK.

http://www.r3vlimited.com/board/showthread.php?t=99913&highlight=weight

Weights verified by pictures in that thread. The weighing of the M42 by Vorshlag wa ...

I dont know of any M52s in a 2002. But I dont think mounting the motor in there would be that hard. At the very worst you'd have to get rid of the steering box, switch to a rack and fab up some custom ...

Wow, so much misinformation in this thread as usual.

Look here for starters:
http://forums.bimmerforums.com/forum/showthread.php?t=698624

Ive been trying to decide between an M42 turbo and an a ...

i really don't know which ones the M10 or M20 are

Why are you asking about engine swaps when you don't even know what motor is in your car currently?

Motor/tranny sold to Sergio. Thanks guys.

M10 motor and tranny for sale.

Motor was running when it was pulled.

100$OBO for everything. I NEED this thing out of my garage. Local pickup only.

Located in Fort Worth TX.