Search found 45 matches

Interesting as I have had a Behr, a Clardy, and a Frigiking and none of them looked like that. My clardy had only one row of vents. The frigiking was vertical on the sides ( did not flare out). The be ...

I have used graphite lube ( such as lock-eze) on plugs since my first 1600 in 1981. Threads are clean upon removal. Never a problem.

Any problem with resistor plugs WR8dc instead of W8dc? I use a Bosch red coil w/ pertronix and std. wires / connectors.

Thanks for any feedback!

I just had mine replaced this week. I bought the OEM seal in advance and my lockstrip was about 3 years old so i opted to re-use it. They quoted 300.00 installed. Of course there was some rust underne ...

Check steering box adjustment?

Mine did the same thing. If I recall I removed the seat and slightly bent the rail so that it ran flatter in the channel. This was on the left side only on my seat. I think if you remove the seat you ...

I used to run the taller one without any problems. I would check clearance with hood insulation, hood adjustment andmotor mounts to be sure.

I think C.D. is right as to what is salvagable; however A/C is very doable in an 02 if that's waht you want or need. I had a used Behr system installed 13 years ago and have enjoyed COLD air ever sinc ...

I am looking for a drivers side door handle in nice condition. e-mail @ landon@oddogws.com.

Thanks,

Delia, Where did you get the black faceplate that fits around the tuning buttons and dial?

Looking for the bottom piece that the shift boot attaches to. Excellent condition preferred.

Stunning! Beautiful car.

Stunning! Beautiful car.

I bought a kit recently and thought it to be pretty heavy duty and nice. My upholsterer pointed out that the pattern and seams were stamped. This would result in laying flat as opposed to the raised t ...

I had my flywheel lightened w/ an engine rebuild some years ago. I can't remember the weight but the machining was modest - nothing like a race car. The setup was for depndable street driving. It took ...

I am looking for the bottom shift surround piece from the Behr A/C. The part that the shifter boot attached to. Let me know if it's available and your price.

Thanks,

Landon

landon@oddogws.com

I am looking for the bottom shift surround piece from the Behr A/C. The part that the shifter boot attached to. Let me know if it's available and your price.

Thanks,

Landon

landon@oddogws.com

Had a local shop replace F & R stock springs and bilstein HD's. Car feels good at speed but there is a very pronouned popping sound heard when turning the wheels left or right at low speeds (< ...

How about the factory air cleaner?

Anyone know the difference between "standard" and "reinforced" springs as advertised by Wolleth & nesch? I currently run stock red dot springs with Bilstein HD's. I like the setup and would like to fr ...

to do pre buy inspection for 325ix.

Thanks,

to do pre buy inspection for 325ix.

Thanks,

I live in a rural area and am limited to 2 types of grease available locally.

Super Tech High pressure multi purpose red grease (does not specifically say disc brake wheel bearing)
Lithium soap c ...

Where did you get that faceplate for the blaupunkt?

Try Glenwood Rallye for a low budget drive with a nice variet of cars.

http://mgcc.org/calendar2006/calendar.htm

I've had great wear from bosch remans. I think i've only bought 2 in 25 years of 02 ownership and hundreds of thousand of miles. Now starters...thats a different story.

I've been rear ended 3 or 4 times in 02's ove rthe last 25 years. when it happens it's hard to avoid and I don't think the 02 is very visible. Anyway when there is no contest as to who's fault it is t ...

As I knew nothing about A/C's I had a shop do a custom install for me about 10 years ago. I seem to remember about $1800.00 - not cheap but well worth it for the Houston climate I was in. New Sandin c ...

Your car looks great and I like that Swift. I just drove my 02 to the airport this morning and flew a T182T from glenwood springs to grand junction and back. Then hopped back in the 02 to go to work. ...

It seems to me that the flow is regulated by the speed of the pump impeller. I would worry that the engine would not heat up quickly enough with an open thermostat.