Search found 260 matches

Ditto

Justin

Hey Dugz,

I totally can relate to the frustration in dealing with POs, as sure as all the others have in some form or another in the "02 Tribe".

I feel we as many others have the unlimited enthi ...

All I can find is the cfm to psi ratio, nothing regarding rpm.

Justin

In my fortress of manhood known as the mancave where Lola sleeps, the motor to my 60 gal. V-Twin compressor has siezed. Looking around for a replacement I see the rpm on new 5 hp single phase 220v 20 ...

Very intrigued (sp) Please contact me via email,

justin_evertatsbcglobaldotnet

Looking at trading.

Justin

There is an old saying where I come from:

There is a fine line between RedAss and DumbAss, and I think they just crossed it in a big way.

Justin

THanks for the info on valve lash.

I am using the Cometic (sp) head gasket, the one that you can use again after pulling the head.

Justin

Yep, I have the cam gear cover plate machined, new set of head bolts, complete gasket set, studs and bolting hardware for the front and rear covers.

Head bolt holes were thoroghly cleaned as well. ...

What works best, do you put in the plates on top of the holes or underneath when you butt-weld them in?

Where can I get that 3M 5200 seal sealer, or do you recommmend the stuff that Por15 has?

...

OK, Let me get this straight about a few questions on installing my rebuilt head on the engine.

How often should I recalibrate my torque wrenches, my set is only 2 years old, but I want to make sur ...

Email Sent

Justin

I think I still have mine from my rebuild.

My email is justin_evertatsbcglobaldotnet

Justin

Just saw this..

http://cgi.ebay.com/ebaymotors/BMW-E30-CONVERTIBLE-CONVERT-SPORT-RECARO-REAR-SEATS-CLE_W0QQitemZ170241044748QQihZ007QQcategoryZ33701QQssPageNameZWDVWQQrdZ1QQcmdZViewItem

Let me k ...

Sound good, Strett's got a great set up there.

As for Texas weather, couple of things to know:

If you don't like it, just wait, it usually changes

We have three seasons mild, hot and soaked ...

Greeting Curt,

Welcome to Texas, unfortunately you have decided to move to our state during the hottest part of the year.

I live in Frisco as well, Iwould like to me you when you have settled in ...

Sounds Tasty,

Would give me an excuse from dealing with my wiring woes. I am just down the road in Frisco just off SH380.

Justin
'75 02
Lola

Hot Damn I just go done paying my credit card off!

I'll take the others (door gaskets) that Armond does not want. If they are still available.

Email me regarding payment preference.

Justin ...

HKrix,

You are sooooo MONEY!!

Thank you, thank you, a thousand thank yous

I will keep you posted

Justin

Ok, now things get interesting,

Now that I have finish the front end rebuild, rear disk breaks fabrication, small block freshening, trunk clean up and now waiting on the head to be rebuilt, I have ...

Great Idea!! It has been too long since we have gotten together.

I am currently working on "Lola" in Frisco (just down the road from Denton) and PaulK has his '73 in Plano (just down the road in P ...

I had read recently here that if you get 15" with the same offset as stock wheels, you could still use your stock struts and not wear out the bearings, therefore not having to resort to change out to ...

Thank you Thank you, a thousand thank yous.

Justin

Saw an write up from 02Sidedraft about the guy who recovered his Recaros, he did not mention the guy, tried to contact Sidedraft but has never responded.

Can anyone else could reccmmend a good plac ...

Hey, Thank you very very much for the help!

Justin

After looking at the various write up on the chain tension adjuster, this is what I have assessed so far:

1) After installing the face plate with the tensioner lever in the "oil pool" area, coat th ...

OZTom, Where did you find the "nice one at" Summit? What is the parts number on it?

Thanks in advance

Justin

Hey Sidedraft could you please drop me a line, my email is justin_evertatsbcglobaldotnet. I have a few questions if you could help me.

Thanks!!

Justin

I have both panels if you are interested, you can reach me at justin_evertatsbcglobaldotnet.

Matt,

I would be interested, please email me justin_evertatsbcglobaldotnet

Oh Ok, I meant Pimpkin, but my hands were slippery from working on my car.