Search found 1265 matches

What condition did they tax you on? obviously a car with a blown motor is not average or even below average.

Drove about that many miles with the '74 tii to O'fest in Watkins Glen.. and that included driving all around to events and running it hard for a day in a drivers school.

I only opened my hood to s ...

Try downloading the parts catalog from the tiiregistry...

It has a view of it in there.

http://www.thetiiregister.com/phpmyfaq/index.php?sid=760522&lang=en&action=artikel&cat=220447&id=62&artlan ...

Try downloading the parts catalog from the tiiregistry...

It has a view of it in there.

http://www.thetiiregister.com/phpmyfaq/index.php?sid=760522&lang=en&action=artikel&cat=220447&id=62&artlan ...

11 40 S is a Limited Slip 3.64 ratio diff (transmission makes no difference here)

No spacers does not necessarily mean you have a real 2002 LSD. There is a combination of E21 parts and 02 parts tha ...

And after you get the bodywork done, make sure you put a third brake light in the car... '02s are too low for most people to notice.

I would get another opinion on the repair too, I'd be sure they ...

Usually the injection was removed because the mechanic working on it had no idea how to properly service it.

I'd bet it would need very little to get it up and running.

I'd say just add the other '02 to the stable.... so if you can do it.. I'd say both.

God awful bumpers? I love 'em, you can't tailgate on a roundie. Try parking in my neighborhood with your pretty ...

Many glass places that have replaced VW windows have the same lock strip. You may be able to source locally and not have to use the coaxial cable which is big if I am thinking of typical catv cable.

Andrej.... replace those strut bearings! They are starting to crack...

Yes, still looking. Let me know if it is the correct distributor.

Thanks!

Not the right one.

I still need a real 013 with the vacuum port on it.

FYI Brad has a 002, which is perfect for hi compression motors.

Yep, responded, check your inbox.

I will take it.

Anyone have a good or rebuildable 013 around?

Thanks!

Downpipe - With O2 sensor bung welded in it
Center Resonator - decent shape
Rear muffler - decent shape.

Can get pics by the weekend.

Would prefer to sell the whole lot.

Located in Brookly ...

Resize your pictures to 800x600 and they will post fine.

"The Gimp" is a good piece of open source software that can help you manipulate images.

http://www.gimp.org/windows/

Yes, just ran a track day with them last Thursday at the Glen at O'fest

They are not far off a R compound. They have nice feedback at the limit and are a fun tire to drive on.

They stick pretty ...

I love this car! Very cool.

O'fest night rally was a hell of a lot of fun too!

Yep, had to leave on Friday (cut things short slightly).

No issues at all with my '74 tii throughout the trip, drivers school, and the drive back in the rain.

I am going to be back at the track ...

1. '76 02, purchased March of '89. First car/02 and I still have it
2. '87 325is (sold)
3. '92 325is (sold)
4. '97 M3 purchased May of 00'. still have it
5. '74 tii purchased Nov of '05.... still ...

Yes yes a fun time had by all.

Unfortunately, I had to head out today.

Congrats to Bill again, that car is flawless! The concours was held at a beautiful winery on the hill. The sunset was incre ...

NYC caravan of just me will be leaving in the next few hours.

I have Vince's cell number, I'll give you a call later.

Yesterday, I replaced rear brakes with Ireland's Ferodo rear pads and new dr ...

To replace the adjusters, you need to replace the backing plate, which is a very involved task (removing the rear hub).

I'd remove everything out of the brakes. Then use liberal amounts of PB-Blast ...

Locking gas caps are still available... Max has them at $42...

Both of mine are perhaps a later style... no little door.

Also replace that vacuum line that from the brake booster to the manifold. Yours is looking pretty tired.

Yes, warmup regulators are Uber expensive. Double check that you don't have another coolant ...

Need to be there for the concours on Wed! Leaving Tuesday for sure.

Managed to get into the drivers school. Lots of work to do to the Tii beforehand.

Please let me know.

I am heading on Tuesday around mid day I think.

There is no fitment difference between tii/non-tii or ANY year as far as general dimensions or clearances on LHD car. The manifold was the same general shape (yes tii's are larger, but the manifold li ...

Replace the transmission mount too... its looking oil soaked and tired.

Sounds like bad rear hoses.

I swap 'em out.