Search found 120 matches

the reason our military is overstretched, which is debateable, is due to W.Clinton and his defunding/downsizing of our military during his 8 years.

Perhaps you are forgetting about Rumsfeld and his ...

Get a cheap welder from harbor freight, they work well enough for this kinda stuff. They are usually less than $200, and you can practice by getting some sheet metal at a scrap yard or home depot and ...

Movie sighting, an 02 delivers guns in a dark parking garage. You can fit a lot of guns in the trunk.

http://www.imdb.com/title/tt0080641/

When I recently replaced my carpet I found that those holes had allowed water to collect in the pass side foot well. The floor pan was rusting from the inside out. You may want to seal them up if you ...

If that had happened in the states the cops would have trashed the place and shot his dog before giving up the search.

anyway you could post that pic of the ALPINA pedal box? I have been contemplating doing the same thing, as others here have.

Thanks

Remove distributor and oil sender first. Maybe that is obvious, but I thought I would mention it.

I took a 13mm box end wrench and put a steeper bend on it. Do this incrementally until you reach the right amount and you may want to use a little heat if you can. I then cut it in about the middle an ...

I ran a glass pack, not a cherry bomb but similar, for a while. Quite obnoxious, it would set off car alarms when I drove past. In parking garages it would set alarms off from a distance. It was fun f ...

19 to 20 with 40 dcoe's.

Thanks Mike, email sent.

I have searched, but haven't found what I need to do to disable the anti-repeat function in the ignition switch. Can anyone shed some light on the procedure.

Basically what is going is the key t ...

Stirring the pot with a poll

http://www.gallup.com/poll/107617/Americans-Favor-President-Meeting-US-Enemies.aspx

What problems are you having? It really shouldn't be that difficult. Have you tried using a large hose clamp to compress it?

Good luck

If you are familiar with the invisible fences used to contain dogs you know they can be very effective. One of the companies also makes an indoor unit for cats.

http://www.invisiblefence.com/produ ...

I was a process server in the bay area until moving back to Oregon last year. But you shouldn't need a registered server for this, just a neutral party who hasn't served more than a dozen (IIRC) paper ...

Maybe you could rotate the CSL and tii so they both get some road time. Personally I wouldn't let go of the CSL for a mid 80's Porsche. I am very fond of Porsches in general, I own a 1960 356B 1600 su ...

Are you doing a 5spd swap? I put a 245/5 in recently and in my exuberance/haste used the throwout bearing that came on the 5spd. I had the grinding that you describe but it seemed to work ok for a whi ...

Bay Area Motor Club, went out of business b/c they lost their lease. I swapped a motor and all of my suspension and steering stuff during the last few weeks they were open. they posted adds on craigsl ...

I've been considering adding a start button as well b/c my ignition switch is getting a little tough to turn all the way to 'farht'. How unwise would it be to tap into the 'farht' circuit on the ignit ...

plotting her next move

I had delta regrind a cam for me, it was around $160 + shipping. They turned it around in a manner of days, you send your core. They hard weld the cam so you won't need lash caps or eccentrics. You ca ...

What do you have in mind?

I picked up my 76 while living in the bay area for very little money because it would not pass smog. I would highly recommend checking the bay area craigslist often for deals. You may even be able to ...

I am running 9.5:1, dcoe 40's and a schrick 292 w/tii dizzy. I have to fill with premium or it will ping when timed on the 'ball'. With premium fuel I can add about 2* timing. It really doesn't like a ...

Same problem. New but hardly improved.

The seat deleting is more of a passion for Rosco, I doubt he would accept payment. I've tried leaving him at home....... but the beast is hard to contain. In his defense the seat was already cracked a ...

As you can see by the photo's I need to delete the rear seat. I have been following the latest threads and searched etc... But I was wondering if folks usually glue the carpet directly to the 'backres ...

I've had good luck at motorcycle repair shops. They may just give you a few feet or not charge you for a whole roll if you don't need it. Harbor Freight has the pliers you need to twist it, make sure ...