Search found 23 matches

Can I swap any transmission between 66-73?

Are 75-76 different?

Not concerned with Porsche vs BW synchros, etc. just need to know if they will bolt in and if the shifter platforms, etc. will li ...

hi all,

looking for root cause here.

car runs and drives fine. after being out for a bit and doing some light or moderate braking around town brakes tend to hiss a bit. almost as if they are o ...

html test

Anyone kind enough to do me a favor?

I need help with contacting someone over in Europe and possibly shipping something back over to the states.

Your help would be greatly appreciated and compen ...

I didn't buy into the multiple checks option. I'd really appreciate it if someone can help me out.

VIN: YV1LT56D9X2590459

thanks in advance.

Happy New Years to all.

I am very interested in this car. Would like to know if it belongs to anyone here or if they know the owner. I would like to know as much background info as possible before bidding...

http://cgi. ...

the PA or NJ area. Anyone know of a good place?

Everyone let's do our part. If you believe in a TRUE and FREE America be you Republican, Democrat, Libertarian, etc. Ron Paul is our last hope for a free and prosperous future. I am donating about h ...

thanks guys.

those are great suggestions/ideas. I really appreciate it.

Brian - Idle speed is good. Very steady at 900 rpms so I know it's not that. No lightened flywheel. Carb mixture seems ...

What can cause excessive engine/car vibration while idling besides bad motor/trans mounts and maybe leaking vacuum hoses?

My car always shakes too much even though my mounts seem fine and the hoses ...

Hi all,

Has anyone bought/installed a set of these belts from ebay? They look pretty good but I'd like to know/see if they are a direct bolt in or if any mods have to be done to make them work.
...

Hi everyone,

Quick simple question since I'm not online too often to know this. The search function here didn't quite yield the results I was looking for either.

What is the going rate for a ni ...

I can't tell if the more familiar outfits (2002haus, BavAuto, Mesa, Maximillian, etc.) are offering up the "true" Boysen/Eberspacher parts or not.

The give vague descriptions and only provide a par ...

It's always been my understanding that cutting springs is a no-no. I know on some older water cooled VW's I've had the springs eventually bend.

But, I read so many posts in the archives about it a ...

Thanks guys.

Delk, I'm not sure I know what you mean by putting a wire. To what and where? How would it hold it?

Also, I tried the 180 bit and it pops out even more. I turned it against the d ...

Read through the archives about cutting springs so I decided to undertake this project. Cut springs with a dremel and cutting wheel with no prob. Car is lowered and looks great. However, the right ...

I am considering taking on a small project. This car may fit the bill. If your price is negotiable a bit drop me an email as I may be interested. Please send me any more info and pics you may have. ...

If so, drop me a line. Looking for help on shipping something over to the states.

thanks.

Thanks guys.

Greg is right on the money. It is the sensor found on the aft part of the intake manifold. Your car seems to be no exception to what I have found so far - disconnected.

It has 2 s ...

Hi again,

Another question. Searched through archives and no direct hits for my issue.

The factory wiring on a 70 '02 I am working on has an extra red 'closed loop' style spade connector as par ...

Hi all,

Looking through some of the manuals, etc. I see several references to the air temp sensor on these models. It appears some have them, some don't depending on whether they are early or lat ...

Thanks guys. I figured it was something like a noise suppressor but was thrown off when I saw it connected to the coil. Guess the PO *really* wanted to make sure no noise was getting in so he put tw ...

Anyone know what this is? The same item is on the alternator so I figured it was a noise suppressor for the ol' Becker radio but I found this one connected to one of the terminals on the Bosch igniti ...