Search found 561 matches

Hello, Does the trunk lock have a key? If so I'm interested

+ Exhaust too.

Thanks,
you can email me @

minuteman1 at cfl.rr.com

I've found if you don't have your carb and timing adjusted right you can get a crunch when shifting into second or putting it in reverse. I've found the stock settings 2 1/2 turns out on the idle mix ...

Probably just the battery. They'll do that and when you need one, you need one. I had a similar issue with a battery that turned over but didn't have enough amps to crank it. My last one I got from ...

Is the cap you are talking about the one with the two holes that threads down over the shock? Do you need a special tool. I tred to use a punch but it wouldn't turn. There is a cap that goes over i ...

I have my strut houising removed from the car for a suspension upgrade and wonder how to get the strut out of the strut housing? The strut looks to be sleeved in the housing and I'm wondering the bes ...

OK, got the whole strut housing off... strut, housing, rotor and all. Now, I'm wondering the best way to free the strut from the housing. I guess I have to put it in a vice..Are there any lock rings ...

OK, I wanted to get the strut out of the housing with out taking off the whole thing, but I guess I have to take it off. So, do I take off the nuts with the wire on them or the ones (3) under the bal ...

The car is supported correctly and I got the the strut and spring loose by compressing the shock with the floor jack. Anyway got spring out and now am wondering how I pull out the strut. Is the stru ...

Hello, I'm looking to take off my front shocks and wondered what the sequence or process was. Do I have to take off any other parts other than loosen the top bolt on each strut. It looks like I loos ...

Are my stock springs shot? I'm upgrading my suspension to some Koni sport adjustable struts and wondered if it would be bad to use the stock springs. I like the ride but I just don't have any reboun ...

I'm wondering how standard camber plates and camber plate mounts are. Does it depend on the lug count or the type of strut. I have a stock 2002 that I'd like to get some negative camber on and saw s ...

If you still have the shocks, let me know, I'm interested.

email --->
minuteman1 at cfl.rr.com

Has anyone rebuilt the stock boge shocks on a 2002? My car is fully stock and in pretty good shape (1969 2002). The problem is, it rides like a pogo stick w/ little dampening from the stock suspensi ...

Hello, if you still have the camber plates and springs let me know as I'd be interested. I have pay pal and live in FL - 32901.

Thanks,
Seth

You can time it by rotating the distributer. I figure if it was running while loose you should turn it counter clockwise to advance it a little. Then try to start it. There's a sweet spot and if yo ...

Does anyone know the best size compressor to use for a HVLP or similar automotive paint sprayer. I read that it has to have at least 20 cfm at 90 psi. Anyway, I'm wondering what size compressor woul ...

Looks like you were building an engine/drivetrain setup for car #1 anyway. Car #2 give you a good place to put the original drivetrain and engine from the swap. Then, you'll avoid any spares and put ...

Thanks for the link. I searched the site and found a couple other threads on this topic:

http://www.bmw2002faq.com/component/option,com_forum/Itemid,57/page,viewtopic/t,275174/highlight,urethane ...

Hello, I have a non-BMW project I'm working on and I'm looking for the cheapest and easiest solution to paint it. I've seen on TV that they are selling some new Urethane/Polyurethane paints that are ...

I'm looking for a drivers door for my 1969 BMW 2002. If you have a spare in good shape or one on a parts car you don't mind pulling I'd be interested. Pay pal is best for me, and I'm in Central Flor ...

Hello, I saw you are in Melbourne....Are you restoring a 02? Have you seen a white one driving around town?

Sounds like a stuck float might be the issue, but I had a similar problem with my car breaking up under load, or up hills and it was an ignition issue, and tunred out to be the spark plug wires were b ...

That's one thing about electric pumps.. when they go...they go. I'm using an electric pump on my car and am thinking about getting a spare, just in case. Also, my car is using a elecric fuel pump an ...

I use a bosch blue coil and it works great. I was able to get rid of the external resister and just use the coil and it works great, just bolt on, hook up and go. I also saw that the blue coils can ...

The mixture screw on Webers allows MIXED gas and air to be entered in greater or lesser quantities. You cannot seperately adjust just the gas or just the air via the mixture screw.

You are not lett ...

I'll probably get the white door. I just wasn't positive it would fit and match up on my 69 2002. It is in better shape and I can do a trim delete on the bottom, no problem. I hope it bolts up easi ...

You might want to consider an electronic ignition. They pertronix units are easy to install and will put your car in a better tuning range and make it rev better. Also, rough idle is sometimes becau ...

Honda CB's are cool. They are easy to work on and run forever. They usually need the carb cleaned and should start right up. Carb kits are cheap too. Get a god Clymer Manual and read how to tune i ...

Did you check your plugs? You might have fouled a plug. They will also show if it's too lean or rich. Too rich sometimes has cold starting issues...check your plugs.

Out is richer, in is Leaner. You might be too lean if it breaks up on high revs. I've found that if you set it a little rich you can rev to the moon but you might have cold starting issues. Too lea ...