Search found 863 matches

and include all venders. Where's the feedback forum??

Take a camera, post all trip detail. I'm probably not the only one who whould like the hear the adventure. You're welcome here if you need some bits and pieces and would like to watch the pacific fly ...

My advice; cut and weld to fit your prefered tire size. If your spare is fat deepen the well. I do have a couple of spares if you're coming this far north.

It's bolted to the side panels.

I think he means frame rails, not subframes.

deleted to save space

I hate wet floors, rust floors, and floppy door trim panels. Nine out of ten of these problems result from leaky vapor barriers. Next time you have the trim panel and vapor barrier removed from your c ...

Please start one in construction zone. I'll contribute.

deleted to save space

This one computer is the only one I use. Thanks for your interest.

My favorite wheel. The buyer will be very pleased. Great for those of us with long arms. Good price.

Thank you for the reply. Yes, one time they are there, next time not there. No, not seen on other posts, and they are uploaded from my documents to the forum. Could it be blanks in file name; 742002 0 ...

Why do the pics in my project blog come and go?

Might want to measure if it's this one.

This is what I'm doing to my '74. Clean up rust one area at a time, keep it driveable, paint someday. Descriptions in the project blog forum.

Detailed useful advice requires detailed specific quest ...

2 is also for non tii clock.

Sorry about the delay.

It’s not surprising when a replacement body part does not fit. They’re just not made as well as originals. In this case the rear was too high after using up all the adjustment at the hinges, so it had ...

I can provide the rail for $20, shipping included, only if Bill can not. Will post better pic asap.

No email received. I should have amber, violet, and black, no green. Can not make it to PA this year, sorry.

A guide coat of red primer was sprayed on the outer door and blocking was begun using 80 grit. After blocking 15% of the guide coat away with 80, I switched to 120 grit and removed all the red. There ...

The door was hung from the rafters and primed with Sherwin Williams Ultra Fill primer surfacer. I use this product because it is recommended for use over bare metal and does a good job of filling. Epo ...

Body filler was applied to all the dented and welded areas. While the material was still soft it was roughed into shape, and the most of the surface scum was removed using a grater. 36 grit on a long ...

The original left door had rust spots at both lower corners and deep dents above and below the lower side moulding.

The replacement door was installed as a new part on some long ago dismantled car ...

Jerry,
Thanks for the kind words. I was thinking of your frustration when documenting the left door repair. Hoping it will get some of my fellow FAQers to use more aggressive grits. Bondo should not ...

The single greatest cause of frustration with filler, primer, and topcoat shaping is timid choice of grits. Aggressive grits save time and yield a smoother finish. I have started a project thread that ...

There was a small spot in the left 1/4.
The rear glass wanted to come out but that would have led to new headliner etc, etc, etc.......... so I left it in. The hole was fully accessible so I treated ...