Search found 70 matches

I'm looking for the trunk boards. What condition is the rear seat? I'm located in Seattle, and could stop by.

Thanks
Marshall
206-419-6712

My vote: Vacuum leak

Congrats!

That car looks clean. Love the color

-Marshall

Check your relay. I had the same problem happen. I have found if the relay happens to be hanging upside down the springs inside have a hard time. You might want to pop off the cover also to check for ...

Yes the factory temp gauge. My car is 75, though I don't think it matters.

Let me know what you are looking to get for it.

Thanks

Looking to buy a used or new coolant temp Gauge. Will consider buying Fuel level/Coolant temp/signal, assembly.

Thanks
Marshall

Thanks

The car does in fact have the tii style bosch fuel pump, and it looks real clean!!!. It also has a set of stahl headers, and a new alternator!!

Thanks again

Need any parts let me know

Just wondering if there is any thing that might be useful for my 02.

Its a 1975 530i, with fuel injection, 4 speed.

Thanks
Marshall

For those that are looking for 3rd brake light assembly, that looks stock and fits great, try getting the 3rd brake light assembly from a mid 80's and up Peugeot 505 sedan. The rake of the assembly is ...

For those that are looking for 3rd brake light assembly, that looks stock and fits great, try getting the 3rd brake light assembly from a mid 80's and up Peugeot 505 sedan. The rake of the assembly is ...

Most likely air is trapped in the heater core, or the t-stat is stuck open.

What I'm interested in, and this is a little off topic, is why with 2002's, the lower radiator hose never gets warm? M ...

Just picked up a 107K LS 3.90 Diff, and was wondering what fluid are you running and are you using any additive, and if so what kind???

TIA
Marshall

Not sure if you mean tie rod ends or ???. Anyways, he might want to try heat, maybe from a small propane torch, if that doesn't work try some PB Blaster.

HTH
Marshall

Thanks everyone, should have them on in a couple of weeks. Stacey your car looks great. Are you using center caps, and if so what ones?

Thanks

-Marshall

Anybody using 14 inch steel wheels from the E30's. What size tires are you running, and any issues with rubbing/offset/fit??. I will be picking up a set soon, and plan on painting them silver.

TIA ...

The car is and will remain my daily driver, so is the aluminum flywheel really overkill for a daily driver?

Also I found a Aluminum flywheel by a company called SPEC, that sells for around $350. So ...

Looking in to buying a aluminum flywheel, but am considering just lightening the stock one. Any pros/cons to either??

Also who has the best prices if I do decide to opt for the aluminum.

Thanks ...

The sleeve and the bolt right next to it, provide the mounting points for the bracket. The best setup I've found is using the stock 4-speed trans bracket with the exhaust bracket from a 320i. This set ...

Fill the tire up with air again, and spray the tire with a foam type glass cleaner, and you will eventually find the leak when you see tiny bubble appear.

Good Luck

The windage tray should just be bolted in along with the oil pan, I think you are thinking of the baffle??

Thinking about putting in a IE windage tray, but wanted to check with others experiences/comments.

Thanks
Marshall

Hey Jonathan

I work on Roosevelt in the U-district. Feel free to stop by the shop, or give me buzz.

Marshall @
EuroCar Service
5821 Roosevelt Wy NE
206-419-6712

Just pulled of a 81 320i. The shoes, hardware, drums and wheel cylinders have less than 6K. Includes the backing plates, but no E-brake cables. Located in Seattle. Can provide pic, with request.

Ma ...

I'm going to be parting out a 81 320i tommorrow. Is there anything besides the rear brakes, trans, and hubs, I should bother with taking off?

Thanks
Marshall

[/img]

Replacing the seal is not the hard part. The hard part is once the seal is in, is adjusting the door and adjusting the window, so it sits flush with the top part of the seal. I replaced mine not to lo ...

To make sure, check the resitance with an ohm meter. This way you will know for sure if the pertronix is faulty! If you don't have one, invest in a simple DVOM.

To make sure, check the resitance with an ohm meter. This way you will know for sure if the pertronix is faulty! If you don't have one, invest in a simple DVOM.

Looking at buying one, but wanted to know what others have to say. I know they come with some sort of mirror system, so as to make viewing easier @ different angles- M10!