Search found 236 matches

So I'm looking to get into auto and motorsport photography and I'm looking for some pointers. Most of my experience has been shooting color slide film and b&w, but I have access to a canon DSLR and a ...

Please be sure to share some pics of your 318 after you get all the new goodies on it... I'm thinking my brother "needs" one of those cars...

Emailed you about the carb.

No cutting!! there is room to get to it, just pull the carpet down.

Do you mean the carpet around the inside of the cabin, the kick panel?

Thats how i did it. here's the P/N (Thanks to Curt Ingr ...

No cutting!! there is room to get to it, just pull the carpet down.

Do you mean the carpet around the inside of the cabin, the kick panel?

Thats the factory piece, I replaced at least one of mine when I had the body work done on my car... It goes in behind the A pillar.

Ah, man. Mine is totally junked then. How the heck do you get i ...

After trying to re-fabricate a junked door brake mount (the part that holds the pin) I'm wondering if this would be a better option.

http://2002ad.com/storeworks/view_item.cfm?id=1394

Anyone tri ...

OK, I took the doors to the UPS Store and, DAMN, I left the quote in the truck, but I remember packing them was 69.00 and shipping them was, if I recall correctly, 149.00. That's putting them in one b ...

Ford Crown Victoria - I enjoy having people slow to 55mph and change lanes when I pull up behind them

I always wanted one for this reason.

My mother has one. Its beige and TOTALLY looks like a ...

i have the same plates and additionally i have my struts bent 1.5 degrees and i have 1.0 degrees negative camber on a laser machine. wtf? my car has never even been bumped. in one book i read it said ...

i'm currently running the bbs basket weave rims 4x100 14x16.5, im looking at some new options, i think the offset of them is 34, but where is the offset of the rim measured from? im looking into somet ...

I've had great success talking the local bicycle shop out of their shipping boxes, lining it with styrofoam sheet(1") I bought at the big box home centers and wrapping the whole box with nylon reinfo ...

alright then the specs are. 15x7 et12

These fit without flares? I thought that an et12 sticks out too far on a 2002?

Sounds great. I got a quote yesterday from an online shipping outfit called Freight Center. I told them I thought the doors were about 65 pounds each and she gave me a price of $225 for two pallets, m ...

Don't underestimate the amount of work to get the carrier brackets ground down for the rotors to clear. Mine were locked tight when I started. I had them on and off the car about 15 times dremelling ...

Thanks Colin. What do you think about the sound? Not too noisy? Others?
I would not like to draw attention when cruising.

I came from an Ansa, which sounds pretty exciting but is too loud for my g ...

Hey Charlie,
Can you post a pic of the set up from the other side? I'm getting ready to do this swap but my 02 is my daily driver so I need to make sure I've got everything sorted before I start... ...

Please, you provide the picture after you've done the installation. And tell if you managed to fit it so that there's no rattles or other trouble.

I'm also thinking about ordering one. Even though ...

Let us know how it turns out.

Logically, one would think that having a cage would lower your insurance rate, but we all know that is not the case...

did the rear section that mates to the muffler go over the rear axle or below?

Over. It takes some fiddling with to get it to not rattle (mine does now a little bit.) If it hits the subframe, I t ...

did a search and I found only partial pics.
anyone have a pic of the installed Ireland stainless exhaust kit on their 2002, all the way from the exhast header/downpipe to the rear muffler? We're inst ...

I just went to the Ireland stainless steel set up and its wonderful. I think you'd have a hard time finding a better product.

Here's how I replaced my trunk floor and tail panel. The vertical piece you referred to is part of the tail panel. If you buy a new tail panel, it is included.

http://www.2002tii-restoration.org/im ...

same as in a roundie, I am assuming you mean the rear body panel. Rear clip would include the quarters and part of the floor, which is much more difficult.

Great pics, thanks. I did mean ...

It couldnt be too hard, whenever I look at the rear clip it looks like it would be much easier than the nose!

Yeah it looks alright for the most part. Its the bit behind the bumper that I sort of ...

Hi,
I'm wondering how difficult it is to replace the rear clip in a squarie? Anyone done it?

Just looked at the door look good small rust spot size of a dime does not look to go all the way through . I will sell the door complete for 70.

Can you email me at colin-at-sfrecording.com about t ...

Sorry. Just click on the link in my signature and you can reach me there.

Sorry somehow I managed to enter the same post twice w my phone. 20 + shipping is fair, can you at least make it a coconut hershy kiss!!!Lol

No problem. Email me via the forum and we can work out ...

$20 w shipping? I'll take it!!!

I can sell this locally quite easily, so it is simply not worth my time to fund the shipping. The item is in like new condition and I'm trying to give someone a dea ...