Search found 1253 matches

Car's still in the shop!

Boo.

H_Krix, what was your website/blog address again?

Oh, this issue has been beaten quite a bit.

Basically, it comes down to what you want. Number matching cars aren't that much more valuable (not like early Camaros and Mustangs). Original color seem ...

You're looking at a lot of custom machined parts. Also, with the half-shafts being shortened to accomodate the inboard brakes, I'm not sure that the stock CV joints could handle the angles of full sus ...

Dude!

http://educate-yourself.org/lte/bush_satan_5.jpg

The day I see this clown driving an 02 is the day I drive mine off a cliff.

Damn, I could really use a 3.64 LSD but I'm nowhere near New Jersey and I don't have the money!

That's always the case, isn't it?

turbo position and idler arm are going to be friends..

Hmmm...sounds like a lot of fun. I'd like to see someone import a new 120d and do the swap.

http://bmw120d.com/images/4c_diesel_400px.jpg
...

http://x12.xanga.com/2f4c702719d30195575111/z151044993.jpg

Dropped the car off at the bodyshop last night. I'm crossing my fingers, hoping that everything will come out okay....and that they won't ...

But for starters.....

The M21 (324TD & 524TD) is based on the same architecture as an M20, for which there are conversion parts. You'll have to switch your fuel lines to diesel-friendly lines and b ...

Yes, 80-83 320i hubs on non-tii struts.

I ordered calipers for an `87 Volvo 240, just make sure you're asking for vented rotor calipers.

the kits available come with all necessary parts and very good instructions included....

i installed some on one of my o2's in about an hour...pretty easy stuff

Didn't someone (HKrix?) do a how- ...

Don't forget that if you're bringing a '76 to California and want to register it here, you'll have to smog it. Might be worth keeping it registered out of state if you've removed any of the smog stuf ...

San Francisco Bay Area 02 guys: I'm considering relocating to the San Francisco area and I wanted some information on where to move and what events there are for 02ers.

Can you guys email me at cl ...

Clay,
I should have one, this is an example of what I was saying, when these were $20, we changed all the mouldings on every paint job, now we are more selective.
Dave

Sure. Shoot me an email ...

3.45:1 diff -- W=1.24 speedo
3.64:1 diff -- W=1.297 speedo (W=1.30 is close enough)
3.90:1 diff -- W=1.39 speedo ('76 49-State 2002)
3.91:1 diff -- W=1.393 speedo (E21 320is LSD)
4.10:1 diff -- W= ...

Hmmm....do you have a lower passenger side door trim piece? I didn't want to spend the dough to get one new piece of trim....I just need one to cover the clips!

Email me at clay [dot] weiland [at] ...

I searched but couldn't find anything in the archives, though I could swear I saw someone post this answer.

What markings on the back of the speedometer indicate which differential gear ratio that ...

I imported Tim Skwiot's table and it works really well. I'm curious now about any changes that might help with optimizing fuel mileage. Obviously, the EFI will help, but my goal for now is good mileag ...

There you go:

Still Copyrighted!
http://i138.photobucket.com/albums/q256/richstern/LeMansClassic99.jpg
http://i138.photobucket.com/albums/q256/richstern/LeMansClassic89.jpg
http://i138.photobuck ...

Any idea what my fuel consumption might be in my amazon colored 72 2002 if I drive in reverse? The dash is cracked and the interior is tobacco colored. It is basically stock, except for the triple w ...

This topic has been discussed many times.

Basically, it breaks down like this:

Things that make your gas mileage go up:
-Engine is tuned and timed properly
-Stock Cam
-Electronic Fuel Injecti ...

Look for something in the $2500-3000 range. Don't go over $3000 if you can help it.

That'll get him a good, running car with a few problems. Use the remaining $$ in the budget to change all the flu ...

Make it the weekend of July 27-28 and I can make it.

Nice work!

Before I got my current car, which I foolishly hope to get the Behr unit working on, I constructed the beginnings of a center console. I didn't care about the exposed screws, so I just u ...

Please send me an email at clay (dot) weiland (at) gmail (dot) com.

Thanks, man!

I realize that some might be reluctant to admit it here, but for those who realize their relative anonymity; Has anyone faked their way through the visual emissions test in California?

My dad used ...

Does anyone have a stock muffler sitting around that they can measure for me? I need to know the inside diameter of the inlet tube where it meets/slips over the resonator.

Thanks in advance!

Good to know. Thanks, Steve!