Search found 442 matches

Basic msd coil (blaster 3) . 40.000 V +. Low internal resistance. Use with a ballast resistor supplied if run with points.

yep, there's something wrong with the washer pump relay (round thing). Check if the wires are hooked up correctly and use that voltmeter to see if any unwanted wires are hot.

I have also noticed ...

Oh yeah, that's the answer I was waiting for! Thanks a lot guys.

Yup.

"RG 6" is the bigger stuff, and it works even better.

And that stoopid lockstrip, that used to be $11, is now as much a ...

can I use the above 1/4 coaxial cable to temporally substitute for the lockstrips. Pardon my ghetto solution. My car has brand new gaskets everywhere, but the PO sadly never finished the job...

hey Ashlock if you need someone to do the metal work for your car I have a local guy who is great and cheap. He has a very good reputation from some of the best shops in Vancouver. If you are intere ...

320is cars are pretty nice cars, I have owned one previously. Mine is off the road right now as well, i. e. I have to sort my trans out and the rocker panel bits need to be welded on, other than this ...

I think it's so hard to put a number on a restoration. If you just want to "freshen" the car up, then you can probably do it for about $10 - $15k. This would make the car look great, but it would not ...

Well if you dont need new i have a rust free parts car i could cut sheet metal off. Not sure what part that is though. Jason

It's the bottom portion of the 1/4 panel. I figure I won.t be using us ...

Cool, thank you guys.

I have contacted Jaimic and the shipping for complete oversills is $200, which defeats purchasing them at the first place.

These are from Chasel and the shipping, as well as the price are the kil ...

G. These fenders are worth a repair now

I have noticed that both gaskets (rear and front glass) are missing the chrome piping strips. Are they for beautification only? Or they help with locking the glass in place?

Just get a Miller. They are very good welders that depreciate very little over time. You can always resell the thing later if there is no use for it.

Those are OK for the job you are describing. I have used a Miller 150 myself, and those can be had for $500 used and resold for the same dollars faster than the clarkes.

$350 with the gas kit and b ...

I figure you may wanna find out to whom the car belonged to. Possibly a deceased person or what not

never mind, I have got it now. It's 150hp in top shape if anyone is wondering.

What kind of power are those old kits making on mild 2.0l/1.8 head engines?

Let me guess....not much?

Nothing is free that's for sure, but in by books such process is called "recycling"/storage/towing. Take it, and part it out. You will do a good service to the community, environment, and yourself. ...

These flaming wars are fun, aren't they?

I shall go and lock up a trained midget with my gun in the 02's trunk!

Seriously, I do need a basic paging alarm to scare off opportunistic thieves ...

Compustar VS Viper , Professional VS Hack Job, etc. Please, discuss!

Just take the thing apart yourself, prep properly, remove all the rust,mask, and have it sprayed by a someone in a paint booth. $500 tops to do that. You will get great results out of it. Just polish ...

Best source in the next 7 days preferred !!!

I bought the main seals from Jaimic. They dont seem to have the other ones.

I destroyed the old crusty vertical seal and just unscrewed the bracket with my elf hands, hence PO riveted the glass to the bracket. I figure replacing with a screw or some tricky part for quick rele ...

Thanks for the response Toby.

I destroyed the old crusty vertical seal and just unscrewed the bracket with my elf hands, hence PO riveted the glass to the bracket. I figure replacing with a screw ...

Can I swap out the gaskets without removing the windows. Is the gasket held by the trim or rivets in there?

How many hours does it take to do both sides?

It`s probably some bull as in the case with my car. The wire came off once and the thing was flashing the light at low rpm only, uh! Fixed that, it stopped for a while. now the light doesn't work at ...

I would say this: have it stock with tasteful and acknowledged upgrades such as a 5spd,euro bumpers, etc.

It seems that there are a few members on here that actually regret installing flares, ai ...

Awesome, Thanks Pat.

Yeah, you might as well shoehorn a Ls1 in there