Search found 844 matches

does the bavauto bleeder pressurize the reservoir with new brake fluid or just air??

TK

man, those things are a blast.
Reminds me of this:
http://www.youtube.com/watch?v=DwYXabC_8wM

Hmmm,
I'm beginning to think I'll just go with the MS on the stock motor and try to find an old diesel rabbit or something. A dummed down 02 isn't sounding like too much fun.

Thanks for all the ...

Greetings all,
I arrived in Kodiak AK, last week to gas prices of 4.83 for the cheap stuff. Ouch.
I'm 3/4 way through a Mega Squirt conversion (MS is in and running ignition, have all the parts f ...

Sorry, but you were all incorrect.

Something to consider if you use the frame rails. Jackstands here stress the car. Try jacking it here for a bit with the stands and check how differently the doors close. U usually turn the flat pa ...

Harrison,
console looks great. You have me curious with your hazard relocation. Did you have to extend the switch harness or was there enough slack to stretch it over there?

TK

along the lines of the ejection seat, how about one that says "ERECT".
I think that'd be cool just for the WTF factor...
Probably be best not to push it with 2 dudes driving tho

Try hooking your 02 sensor up to a relay lead coming out of the fuel pump power from the MS system, that way if the motor is not running the 02 sensor won't sit there burning away.

TK

I was tearing down a black 76 that I had for 11years, I was taking the idiot light pod off of the dash and lo and behold there was the spare key that I put in there when I first bought the car. NO IDE ...

I just had a standard stainless from IE and had to jack it and go in from the bottom. The step is probably going to be the same.

TK

I knew there had to be at least one 02, finally found it. Bunch of Isettas, CS
s, and an Alpina E21
Where's the pics of the moldy Turbo that CD is always posting???

TK

found this browsing around...
http://www.supercarforums.co.uk/chatforum/viewtopic.php?t=30&postdays=0&postorder=asc&start=0

lots of really neat old cars, saw a 2000ti somewhere about 10 pages in, ...

Hey all,
I just picked up a nice shorty bumper for my 75. I have the middle mounting holes figured out, but don't have the car to look at the sides. Does it use the same hole on the outside as the ...

Update,
there's a 75 Inka/Fjord respray that's fairly intact, motor is gone, VERY nice dash with only some small cracks. 3/4 of a roundie colorado right next to it that looks like it went through a ...

YES, another one saved...

Black but keep the intake red just because it doesn't belong in an 02 but it's standing there yelling "well, here I am, deal with it!"

Oh, and thanks again for the schematic you sent a while back. ...

That shit'll buff out...

it's not too hard once you have the box out. Usually, if you can get the motor spinning by lubing up the bushings and then replace the brushes. Most good hardware stores will carry an assorted suppl ...

Talk to Matt Mcginn at http://www.sports-car-restoration.com/
They had a white S-14 conversion at V@V that they were doing for a customer. The car was pretty baddass. They're from CT.

I think I have my wife convinced that we actually have a need for one of these...

http://www.youtube.com/watch?v=U2jRHYJCmOM

http://www.youtube.com/watch?v=iyQ9MpqK4Ks

http://www.youtube.com/ ...

I grew up in a town full of hippies. We had one of the following:
Crystal
Rainbow
Breeze
Summer
Oaken
Clear

There was another odd one, but I can't remember what it was...

Regards,
TK

I gotta say, this was a blast. First event I've ever attended and it was well worth it.
I think there's about 150 pics uploading right now, the hotel internet isn't that quick.
Time to go get som ...

I'll have both of these in my trunk at V@V, I don't really want to ship them.
I'd like 20 for the black 19mm bar and 100 for the 23 (it could be 25mm, I'm going on at least 10 years of memory from wh ...

disregard, wrong thread...

Hi Eric, I don't know if you remember me, I'm pretty sure I talked to you a few years ago when I lived in Kodiak. I'm moving back in a few months and it's good to know that I won't be the only one up ...

Is this out at the old Mather AFB??

Well, I went out and got one the other day. Today I busted it's cherry, fired it up and blazed up a couple of ribeyes. OMFG. Soooooo much better than the lowes propane grill I've been using for the ...

try downsizing the pic, if they're too big it won't take it..

1024x768 is the biggest it will take i think

After many hours of benchbleeding the new master cyl, instaling new rear cylinders, front calipers, stainless lines and new bearings. New shoes and rotors.

When you finally get to pressure bleedin ...